會員中心 | English | 繁體中文

梅花槽六角頭自攻螺釘-B牙,BP牙 [表30&41] ASME B 18.6.3 (Hex-VI-B/BP) - 2013

選擇規格尺寸點擊↓

10#

12#

1/4

5/16

3/8

ASME B 18.6.3 (Hex-VI-B/BP) - 2013 梅花槽六角頭自攻螺釘-B牙,BP牙 [表30&41]

尺寸單位: inch

美標ASME B18.6.3 (Hex-VI-B/BP) - 2013 ASME 梅花槽六角頭自攻螺釘-B牙,BP牙 [表30&41]

掃一掃分享

公差最小破壞扭矩牌號等級

螺紋規格

10#

12#

1/4

5/16

3/8

PP
d	最大值
	最小值
d₁	最大值
	最小值
s	最大值
	最小值
e	最小值
k	最大值
	最小值
d_p	參考值
y	最大值
	最小值
槽號
A	參考值
t	最大值
	最小值

24	20	20	19	18	16	14	14	12	12
0.114	0.130	0.139	0.154	0.166	0.189	0.215	0.246	0.315	0.380
0.108	0.123	0.132	0.147	0.159	0.182	0.208	0.237	0.306	0.371
0.086	0.094	0.104	0.115	0.122	0.141	0.164	0.192	0.244	0.309
0.082	0.090	0.099	0.109	0.116	0.135	0.157	0.185	0.236	0.299
0.188	0.188	0.250	0.250	0.250	0.312	0.312	0.375	0.500	0.562
0.181	0.181	0.244	0.244	0.244	0.305	0.305	0.367	0.489	0.551
0.202	0.202	0.272	0.272	0.272	0.340	0.340	0.409	0.545	0.614
0.060	0.070	0.093	0.093	0.110	0.120	0.155	0.190	0.230	0.295
0.049	0.058	0.080	0.080	0.096	0.105	0.139	0.172	0.208	0.270
0.079	0.087	0.095	0.105	0.112	0.130	0.152	0.179	0.230	0.293
0.083	0.100	0.100	0.105	0.111	0.125	0.143	0.143	0.167	0.167
0.063	0.075	0.075	0.079	0.083	0.094	0.107	0.107	0.125	0.125
T10	T10	T15	T15	T20	T25	T27	T30	T40	T45
0.111	0.111	0.132	0.132	0.155	0.178	0.200	0.221	0.266	0.312
0.040	0.050	0.051	0.051	0.065	0.080	0.080	0.095	0.125	0.155
0.035	0.040	0.040	0.040	0.050	0.065	0.065	0.080	0.100	0.125

替代列表

ASME B 18.6.3Hex-VI-B/BP - 2013 ASME B 18.6.3H9B-VI+T1B - 2024

同版本產品組

ASME B 18.6.3 (T30-VI+T40) - 2013

梅花槽六角頭自攻螺釘- AB ABR自攻螺釘

ASME B 18.6.3 (Hex-VI-B/BP) - 2013

梅花槽六角頭自攻螺釘-B牙,BP牙 [表30&41]

ASME B 18.6.3 (Hex-VI-A) - 2013

梅花槽六角頭自攻螺釘-A牙 [表30&42]

ASME B 18.6.3 (Hex[L]-VI-B/BP) - 2013

梅花槽大六角頭自攻螺釘-B牙, BP牙 [表30&41]

ASME B 18.6.3 (Hex[L]-VI-A) - 2013

梅花槽大六角頭自攻螺釘-A牙 [表30&42]

采用標準

ASME/ANSI B 18.6.3 (T48) - 2013

自攻螺釘擰入性試驗用標準試驗板厚度和孔徑 [Table 48]

ASME/ANSI B 18.6.3 (T49) - 2013

TRS型自擠自攻螺釘?shù)淖畲笈ぞ?[Table 49]

ASME/ANSI B 18.6.3 (T50) - 2013

自攻螺釘?shù)目古?qiáng)度 [Table 50]

ASME B 18.6.3 (DATA-G) - 2013

機械螺釘和自攻螺釘?shù)耐ㄓ靡?

ASME B 18.6.3 (catalog) - 2013

產品表單總覽

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

GB /T 3103.1 - 2002

緊固件公差（螺栓、螺柱、螺釘和螺母）

GB /T 34632 - 2017

統一螺紋搓制和滾制前的毛坯直徑

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息

1	[國標] GB /T 5285 - 2017	六角頭自攻螺釘 Hexagon Head Tapping Screws 供應商(1)
2	[國標] GB 5285 - 1985	六角頭自攻螺釘 Hexagon Head Tapping Screws 供應商(1)
3	[美標] IFI 502 - 1982	米制六角頭自攻釘 Metric Hex Head Tapping Screws
4	[德標] DIN 7976 - 1990	外六角自攻釘 Hexagon Head Tapping Screws 供應商(4)
5	[國際] ISO 1479 - 2011	六角頭自攻螺釘 Hexagon Head Tapping Screws
6	[國際] ISO 1479 - 1983	六角頭自攻螺釘 Hexagon Head Tapping Screws
7	[日標] JIS B 1123 (JA3) - 2015	六角頭自攻釘 [JA3] Hexagon Head Tapping Screws [JA3]
8	[日標] JIS B 1123 - 2015	六角頭自攻螺釘（C型,F型和R型） Hexagon Head Tapping Screws (Type C, F and R)
9	[日標] JIS B 1123 (AT1) - 1996	六角頭自攻螺釘（C型和F型） Hexagon Head Tapping Screws (Type C and Type F)
10	[日標] JIS B 1123 (AAT1) - 1996	六角頭自攻釘 [副表1] Hexagon Head Tapping Screws [Annex Attached Table 1]
11	[美標] ASME/ANSI B 18.6.3 - 2010	六角頭自攻釘 Machine Screw and Tapping Screw Nuts (Inch Seires)
12	[意大利] UNI 6949 - 1980	六角頭自攻螺釘 Hexagon Head Tapping Screws
13	[法國] NF E 25-662 - 1994	六角頭自攻螺釘 Hexagon Head Tapping Screws
14	[英標] BS 4174 - 1972	六角頭自攻釘 [Table 21] Hexagon Head Self-Tapping Screws [Table 21]
15	[澳標] AS /NZS 4402 - 1996	米制六角頭自攻螺釘 ISO Metric Hexagon Head Tapping Screws
16	[臺灣] CNS 4308 - 2000	六角頭自攻螺釘 Hexagon Head Tapping Screws
17	[標準] YJT 1020	梅花槽混凝土自攻型錨栓(盤頭/沉頭/六角法蘭頭)
18	[標準] YJT 4063	六角頭自攻螺釘 Hexagon Head Tapping Screws
19	[德標] DIN EN ISO 1479 - 2011	外六角自攻釘 Hexagon Head Tapping Screws 供應商(4)
20	[美標] ASME B 18.6.3 (H9A+T1A) - 2024	無槽或開槽六角頭以及大六角頭 AB ABR自攻螺釘 Plain (Unslotted) and Slotted Regular and Large Hex Head Tapping Screws - Type AB and ABR
21	[美標] ASME B 18.6.3 (H9B-I+T1A) - 2024	十字槽凹穴六角頭以及大六角頭 AB ABR自攻螺釘 Cross Recess Indented Regular and Large Hex Head Tapping Screws - Type AB and ABR
22	[美標] ASME B 18.6.3 (H9B-VI+T1A) - 2024	梅花槽六角頭自攻螺釘- AB ABR自攻螺釘 Hexalobular Socket Hex Head with Type AB and ABR Thread-Forming Tapping Screws
23	[美標] ASME B 18.6.3 (H9C-I+T1A) - 2024	十字槽六角頭以及大六角頭 AB ABR自攻螺釘 Recess Dimensions for Type I Nonindented Regular and Large Hex Head Tapping Screws - Type AB and ABR
24	[美標] ASME B 18.6.3 (H9B-VI+T1B) - 2024	梅花槽六角頭自攻螺釘-B牙,BP牙 Hexalobular Socket Hex Head with Type B and Type BP Thread-Forming Tapping Screws
25	[美標] ASME B 18.6.3 (H9B-VI+T1D) - 2024	梅花槽六角頭自攻螺釘-A牙 Hexalobular Socket Hex Head with Type A Thread-Forming Tapping Screws
26	[美標] ASME B 18.6.3 (H9B[L]-VI+T1B) - 2024	梅花槽大六角頭自攻螺釘-B牙,BP牙 Hexalobular Socket Large Hex Head with Type B and Type BP Thread-Forming Tapping Screws
27	[美標] ASME B 18.6.3 (H9B[L]-VI+T1D) - 2024	梅花槽大六角頭自攻螺釘-A牙 Hexalobular Socket Large Hex Head with Type A Thread-Forming Tapping Screws
28	[美標] ASME B 18.6.3 (T30-VI+T40) - 2013	梅花槽六角頭自攻螺釘- AB ABR自攻螺釘 Hexalobular Socket Hex Head with Type AB and ABR Thread-Forming Tapping Screws [Table 30&40]
29	[美標] ASME B 18.6.3 (Hex-VI-A) - 2013	梅花槽六角頭自攻螺釘-A牙 [表30&42] Hexalobular Socket Hex Head with Type A Thread-Forming Tapping Screws [Table 30 & 42]
30	[美標] ASME B 18.6.3 (Hex[L]-VI-B/BP) - 2013	梅花槽大六角頭自攻螺釘-B牙, BP牙 [表30&41] Hexalobular Socket Large Hex Head with Type B and Type BP Thread - Forming Tapping Screws [Table 30&41]
31	[美標] ASME B 18.6.3 (Hex[L]-VI-A) - 2013	梅花槽大六角頭自攻螺釘-A牙 [表30&42] Hexalobular Socket Large Hex Head with Type A Thread - Forming Tapping Screws [Table 30&42]
32	[美標] ASME B 18.6.3 (T29+T40) - 2013	無槽或開槽六角頭以及大六角頭 AB ABR自攻螺釘 Plain (Unslotted) and Slotted Regular and Large Hex Head Tapping Screws - Type AB and ABR
33	[美標] ASME B 18.6.3 (T30-I+T40) - 2013	十字槽凹穴六角頭以及大六角頭 AB ABR自攻螺釘 Cross Recess Indented Regular and Large Hex Head Tapping Screws - Type AB and ABR
34	[美標] ASME B 18.6.3 (T31-I+T40) - 2013	十字槽六角頭以及大六角頭 AB ABR自攻螺釘 Recess Dimensions for Type I Nonindented Regular and Large Hex Head Tapping Screws - Type AB and ABR
35	[美標] ASME B 18.6.5M (T20) - 2000 (R2010)	米制六角頭自攻釘 [Table 20] Metric Hexagon Head Tapping Screws [Table 20]
36	[美標] ASME B 18.6.4 - 1998 (R2005)	六角頭自攻螺釘 B,BP型 [Table 39] Regular and Large Hex Head Tapping Screws - Type B and BP Thread Forming [Table 39]
37	[美標] ASME B 18.6.4 - 1998 (R2005)	六角頭自攻螺釘 C型(統一螺紋) [Table 39] Regular and Large Hex Head Tapping Screws - Type C Thread Forming [Table 39]
38	[美標] ASME B 18.6.4 - 1998 (R2005)	六角頭自攻螺釘 AB型 [Table 39] Regular and Large Hex Head Tapping Screws - Type AB Thread Forming [Table 39]
39	[美標] ASME B 18.6.4 - 1998 (R2005)	六角頭自攻螺釘 A型 [Table 39] Regular and Large Hex Head Tapping Screws - Type A Thread Forming [Table 39]
40	[美標] ASME B 18.6.4 - 1998 (R2005)	六角頭凸緣自攻螺釘 B,BP型 [Table 39] Hex Washer Head Tapping Screws - Type B and BP Thread Forming [Table 40]
41	[美標] ASME B 18.6.4 - 1998 (R2005)	六角頭凸緣自攻螺釘 C型(統一螺紋) [Table 40] Hex Washer Head Tapping Screws - Type C Thread Forming [Table 40]
42	[美標] ASME B 18.6.4 - 1998 (R2005)	六角頭凸緣自攻螺釘 AB型 [Table 40] Hex Washer Head Tapping Screws - Type AB Thread Forming [Table 40]
43	[美標] ASME B 18.6.4 - 1998 (R2005)	六角頭凸緣自攻螺釘 A型 [Table 40] Hex Washer Head Tapping Screws - Type A Thread Forming [Table 40]