會員中心 | English | 繁體中文

米制電阻凸焊用螺釘 [Table 1] BS 7670-1 - 1993

查看供應商

選擇規格尺寸點擊↓

M10

M12

尺寸單位: 毫米(mm)

英標BS 7670-1 - 1993 BS7670-1 7670-1BS 米制電阻凸焊用螺釘 [Table 1]

掃一掃分享

單重計算公差公制螺紋極限尺寸米/英制螺紋對照螺紋直徑與受力截面積毛坯直徑

螺紋規格
d

M10

M12

P	螺距
a	最大值
d_k	最大值
d_k	最小值
d_f	最小值
d₁	最大值
d₁	最小值
d₂	最大值
d₂	最小值
V	最大值
V	最小值
k	最大值
k	最小值
r	最大值

0.5	0.7	0.8	1	1.25	1.5	1.75
1.25	1.75	2	2.5	3.13	3.75	4.38
6.37	8.45	10.45	12.55	16.55	20.65	24.65
5.63	7.55	9.55	11.45	15.45	19.35	23.35
5.13	7.05	9.05	10.95	14.95	18.85	22.85
4.98	6.48	8.08	9.58	12.7	15.7	18.7
4.5	6	7.5	9	12	15	18
1.15	1.45	1.75	2.05	2.65	3.25	3.9
0.9	1.2	1.5	1.8	2.4	3	3.6
0.55	0.7	0.85	1	1.3	1.6	1.9
0.35	0.5	0.65	0.8	1.1	1.4	1.7
1.32	1.72	2.12	2.52	3.35	4.15	4.95
1.07	1.47	1.87	2.27	3.05	3.85	4.65
0.4	0.4	0.5	0.6	0.8	0.8	0.8

①,公差符合：BS 6322-1:1982。

同版本產品組

BS 7670-1 - 1993

米制和美制焊接方螺母 [Table 3]

供應商(1)

BS 7670-1 - 1993

米制和美制焊接六角螺母 [Table 4]

供應商(1)

BS 7670-1 - 1993

米制電阻凸焊用螺釘 [Table 1]

供應商(1)

技術條件和引用標準

材料
螺紋公差
機械性能 ^①
允許偏差
Finish
Acceptability
-

Steel with a carbon content not greater than 0.23 %.

Conforming to class 6g of BS 3643-1:1981 and BS 3643-2 :1981.

Conforming to material property class 4.8 , 5.8 or 8.8 of BS EN 20898-1:1992 , test programme B^②

Conforming to product grade A of BS 6322-1:1982.

As processed, with a lubricant, but free from scale and excessive oxide, as rolled, unless otherwise agreed between the purchaser and supplier^③

In accordance with BS 6587:1985

① Both before and after welding.
② The material property class shall be marked on the bolts by the indented method only.
③ Alternative surface finishes (e.g. electroplating) may be applied, if agreed between the purchaser and supplier. Some surface finishes are unsuitable for welding.

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

注：技術數據僅供參考，請以官方原件為準！

告訴我在“易緊通”看到，將給您優惠

惠州市昇滬汽車緊固件科技有限公司

聯系人：黃俊輝

1540428407 移動電話： 13828802165 電話：0752-3951888, 3951820, 3951821, 3951825, 3951826

材質：1008鋼、1018#碳鋼、Q235碳鋼、35#合金鋼、304HC不銹鋼、316HC不銹鋼，表面處理：環保彩鋅、環保藍白鋅、環保黑鋅、環保鎳、熱鍍鋅、達克羅、以及非環保電鍍，規格：齊全

[詢價]

類似標準及供貨信息

1	[國標] GB /T 902.4 (PS) - 2010	短周期電弧螺柱焊用焊接螺柱 (PS型帶法蘭的螺紋螺柱) Threaded Studs with Flange for Short-cycle Drawn Arc Stud Welding - PS Type Threaded Stud with Flanged 供應商(1)
2	[美標] IFI 148 (U3) - 2002	U3型平圓頭三點下承接面焊接螺釘 [Table 1] Type U3 Projection Weld Studs
3	[美標] IFI 148 (UR) - 2002	UR型平圓頭環形下承接面焊接螺釘 [Table 4] Type UR Projection Weld Studs
4	[美標] IFI 148 (UC4) - 2002	UC4型平圓頭帶環四點式下承接面焊接螺釘 [Table 6] Type UC4 Projection Weld Studs
5	[美標] IFI 148 (T3) - 2002	T3型平圓頭三點式上承接面焊接螺釘 [Table2] Type T3 Projection Weld Studs
6	[美標] IFI 148 (US3) - 2002	US3型重型平圓頭三點橢圓式下承接面焊接螺釘 [Table5] Heavy Duty Type US3 Projection Welding Studs
7	[美標] IFI 148 (TC4) - 2002	TC4型平圓頭帶環四點式上承接面焊接螺釘 [Table7] Flat Round Head with Rings on Undertake Surface Welding Screws
8	[美標] IFI 148 (TUS3) - 2002	TUS3型平圓頭下承接面焊接螺釘 [table8] Type TUS3 Projection Weld Studs
9	[美標] IFI 148 (TD) - 2002	TD型平圓頭凸焊焊接螺釘 [Table 3] Type TD Projection Weld Studs
10	[德標] DIN 34817 - 2017	焊接螺釘 Weld Screws with Metric Thread
11	[德標] DIN 34817 - 2001	焊接螺釘 Weld Screws with Metric Thread
12	[德標] DIN 32501-1 (GA) - 1991	單點焊接螺釘 Studs for Stud Welding with Tip Ignition; Threaded Bolt
13	[日標] JIS B 1195 - 2009	平圓頭焊接螺釘 Flat Round Head Weld Bolts
14	[日標] JIS B 1195 - 1994	平圓頭焊接螺釘 Flat Head Welding Screws
15	[汽標代號] Q 198	A型承面凸焊螺釘 Weld Screws, Type A 供應商(7)
16	[汽標代號] Q 198B	B型承面凸焊螺釘 Weld Screws, Type B 供應商(2)
17	[汽標代號] Q 198C	C型承面凸焊螺釘 Weld Screws, Type C 供應商(1)
18	[汽標代號] Q 199	端面平圓頭凸焊螺釘 A型 Overhead Projection Weld Bolts - Type A 供應商(1)
19	[汽標代號] Q 199B	端面平圓頭凸焊螺釘 B型 Overhead Projection Weld Bolts - Type B
20	[汽標代號] Q 2A8	塑料用焊接螺釘 Welding Screws for Plastic
21	[韓標] KS B 1057 - 2001	平圓頭下承面凸焊螺釘 Flat Round Head Weld Screws
22	[標準] YJT 1005	美制種焊螺柱 Spot Welding Stud (ANSI/ASME/IFI)
23	[汽標] QC /T 598 (A) - 1999	平圓頭下承面凸焊螺釘 A型 Weld Bolts, Type A 供應商(1)
24	[汽標] QC /T 599 (A) - 2013	上端面平圓頭凸焊螺栓 A型 Overhead Projection Weld Bolts - Type A
25	[汽標] QC /T 599 (B) - 2013	上端面平圓頭焊接螺栓 B型 Overhead Projection Weld Bolts - Type B
26	[汽標] QC /T 891 - 2011	塑料用焊接螺釘 Welding Screws for Plastic
27	[汽標] QC /T 598 (B) - 1999	平圓頭下承面凸焊螺釘 B型 Weld Bolts, Type B
28	[汽標] QC /T 598 (C) - 1999	平圓頭下承面凸焊螺釘 C型 Weld Bolts, Type C
29	[汽標] QC /T 599 (B) - 1999	上端面平圓頭焊接螺釘 B型 Overhead Projection Weld Bolts - Type B
30	[汽標] QC /T 599 (A) - 1999	上端面平圓頭凸焊螺栓 A型 Overhead Projection Weld Bolts - Type A