會員中心 | English | 繁體中文

復合槽小盤頭螺釘、彈簧墊圈和方形墊圈組合件 JB /T 14722 - 2024

查看供應商

選擇規格尺寸點擊↓

(M3.5)

括號內尺寸為非優選

JB /T 14722 - 2024 復合槽小盤頭螺釘、彈簧墊圈和方形墊圈組合件

尺寸單位: mm

機械行業JB /T14722 - 2024 JB14722 14722JB 復合槽小盤頭螺釘、彈簧墊圈和方形墊圈組合件

掃一掃分享

公差公制螺紋極限尺寸米/英制螺紋對照螺紋直徑與受力截面積毛坯直徑

螺紋尺寸
d

(M3.5)

P	螺距
s	最大值
s	最小值

0.5	0.6	0.7	0.8	1
6	7	9	12	15
5.7	6.7	8.7	11.7	14.5

①,彈簧墊圈尺寸按 GB/T 9074.26；方形墊圈與復合槽小盤頭螺釘尺寸按同標準中的尺寸。

同版本產品組

JB /T 14722 - 2024

復合槽小盤頭螺釘、彈簧墊圈和方形墊圈組合件

供應商(1)

JB /T 14722 (B) - 2024

方形墊圈

JB /T 14722 (A) - 2024

復合槽小盤頭螺釘

采用標準

JB /T 14722 (B) - 2024

方形墊圈

JB /T 14722 (A) - 2024

復合槽小盤頭螺釘

工藝相關

JB /T 14722 (A) - 2024

復合槽小盤頭螺釘

JB /T 14722 (B) - 2024

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

緊固件機械性能螺栓和螺釘的扭矩試驗和破壞扭矩公稱直徑1~10mm

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 90.1 - 2023

緊固件驗收檢查 (ISO 3269:2019,MOD)

技術條件和引用標準

產品
材料
復合槽
螺紋	公差
	標準
機械性能	性能等級
	硬度
	標準
公差	產品等級
	標準
表面處理
表面缺陷
驗收及包裝
最小破壞扭矩 N·m

螺釘	彈簧墊圈	方形墊圈
鋼	彈簧鋼	鋼
H型十字槽（GB/T 944.1）+ 一字槽	/	/
6g	/	/
GB/T 193、GB/T 9145	/	/
4.8、6.8	/	/
/	392HV~513HV	140HV~300HV
GB/T 3098.1、GB/T 3098.13	GB/T 94.1	/
A	/	/
GB/T 3103.1	/	/
電鍍技術要求按GB/T 5267.1；非電解鋅片涂層技術要求按GB/T 5267.2；如需其他技術要求或表面處理，應由供需協議
GB/T 5779.1	不允許有裂縫、浮銹和影響使用的凹痕、劃傷和毛刺
GB/T 90.1、GB/T 90.2
螺紋規格d M3（4.8級）：0.96 M3.5（4.8級）：1.5 M4（4.8級）：2.2 M5（4.8級）：4.7 M6（4.8級）：7.9 M3（6.8級）：1.1 M3.5（6.8級）：1.8 M4（6.8級）：2.6 M5（6.8級）：5.6 M6（6.8級）：9.4

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

注：技術數據僅供參考，請以官方原件為準！

告訴我在“易緊通”看到，將給您優惠

樂清市精華緊固件有限公司

聯系人：黃經理

277278356 移動電話： 15067776686 電話：057762878825 微信號：15067776686

材質：碳鋼；規格范圍：M3-M6；性能等級：4.8級、6.8級，廠家直銷，非標定制。

[詢價]

類似標準及供貨信息

1	[國標] GB /T 9074.1 - 2018	螺栓或螺釘和平墊圈組合件 Bolt or Screw and Washer Assemblies with Plain Washers 供應商(7)
2	[國標] GB /T 9074.5 - 2004	十字槽小盤頭螺釘和平墊圈組合件 Cross Recessed Small Pan Head Screw and Washer Assemblies with Plain Washers 供應商(2)
3	[國標] GB /T 9074.1 - 2002	螺栓或螺釘和平墊圈組合件 Bolt or Screw and Washer Assemblies with Plain Washers 供應商(7)
4	[國標] GB /T 9074.1 - 1988	十字槽盤頭螺釘和平墊圈組合 Cross Recessed Pan Head Screws and Plain Washers Assemblies 供應商(7)
5	[國標] GB 9074.2 - 1988	十字槽盤頭螺釘和外鋸齒鎖緊墊圈組合件 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies 供應商(1)
6	[國標] GB 9074.3 - 1988	十字槽盤頭螺釘和彈簧墊圈組合件 Cross Recessed Pan Head Screws and Single Coil Spring Lock Washers Assemblies 供應商(3)
7	[國標] GB 9074.4 - 1988	十字槽盤頭螺釘、彈簧墊圈和平墊圈組合件 Cross Recessed Pan Head Screws, Single Coil Spring Lock Washer and Plain Washers Assemblies 供應商(12)
8	[國標] GB /T 9074.5 - 1988	十字槽小盤頭螺釘和平墊組合 Cross Recessed Small Pan Head Screw and Plain Washer Assemblies 供應商(2)
9	[國標] GB /T 9074.6 - 1988	十字槽小盤頭螺釘和大平墊組合 Cross Recessed Small Pan Head Screw and Large Plain Washer Assemblies 供應商(2)
10	[國標] GB 9074.7 - 1988	十字槽小盤頭螺釘和彈簧墊圈組合件 Cross Recessed Small Pan Head Screw and Single Coil Spring Lock Washer Assemblies 供應商(2)
11	[國標] GB 9074.8 - 1988	十字槽小盤頭螺釘、彈簧墊圈及平墊圈組合件 Cross Recessed Small Pan Head Screw, Single Coil Spring Lock Washer and Plain Washer Assemblies 供應商(11)
12	[國標] GB 9074.9 - 1988	十字槽沉頭螺釘和錐形鎖緊墊圈組合件 Cross Recessed Countersunk Head Screw and Countersunk Serrated External Toothed Lock Washer Assemblies 供應商(1)
13	[國標] GB /T 9074.1 (S11)	內六角花形（梅花槽）盤頭螺釘和平墊圈組合件 Hexagon Lobular Socket Pan Head Screws and Washer Assemblies with Plain Washers 供應商(1)
14	[國標] GB /T 9074.32 - 2017	螺栓或螺釘和錐形彈性墊圈組合件 Bolt or Screw and Washer Assemblies with Conical Spring Washers
15	[國標] GB /T 9160.2 (MS) - 2017	滾動軸承附件 - 鎖緊卡 MS系列 Rolling Bearing - Locking Clips - MS Series
16	[國標] GB /T 9160.2 (MSL) - 2017	滾動軸承附件 - 鎖緊卡 MSL系列 Rolling Bearing - Locking Clips - MSL Series
17	[國標] GB /T 9160.2 (MSL) - 2006	滾動軸承附件 - 鎖緊卡 MSL系列 Rolling Bearing - Locking Clips - MSL Series
18	[國標] GB 9074.10 - 1988	十字槽半沉頭螺釘和錐形鎖緊墊圈組合 Cross Recessed Raised Countersunk Head Screw and Countersunk External Toothed Lock Washer Assemblies
19	[國標] GB /T 9074.1 (S3)	十字槽盤頭螺釘和平墊圈組合件 Cross Recessed Pan Head Screws and Washer Assemblies with Plain Washers
20	[國標] GB /T 9074.1 (S4)	內六角圓柱頭螺釘和平墊圈組合件 Hexagon Socket Head Cap Screws and Washer Assemblies with Plain Washers
21	[國標] GB /T 9074.1 (S5)	開槽盤頭螺釘和平墊圈組合件 Slotted Pan Head Screws and Washer Assemblies with Plain Washers
22	[國標] GB /T 9074.1 (S6)	開槽圓柱頭螺釘和平墊圈組合件 Slotted Cheese Head Screws and Washer Assemblies with Plain Washers
23	[國標] GB /T 9074.1 (S10)	內六角花形（梅花槽）圓柱頭螺釘和平墊圈組合件 Hexalobular Socket Head Cap Screws and Washer Assemblies with Plain Washers
24	[國標] GB /T 9074.1 (S12)	六角法蘭面螺栓和平墊圈組合件 Hexagon Flange Bolts and Washer Assemblies with Plain Washers
25	[國標] GB /T 9074.1 (S13)	六角法蘭面螺栓（細牙）和平墊圈組合件 Hexagon Flange Bolts (Fine Pitch Thread) and Washer Assemblies with Plain Washers
26	[德標] DIN 6900-1 - 1990	十字盤頭螺釘和平墊圈的組合螺釘 Cross pan head screw and washer assemblies,coarse threaded screws with captive plain washer 供應商(1)
27	[德標] DIN 6900-5 - 2004	錐形彈性墊圈與螺釘組合件 Assemblies with Coarse Threaded Screws and Captive Conical Spring Washer
28	[德標] DIN 6304 (E) - 2002	帶固定旋桿的卡式螺栓 E型 Tommy Screws with Fixed Clamping Bolt - Form E
29	[德標] DIN 6304 (F) - 2002	帶固定旋桿的卡式螺栓 F型 Tommy Screws with Fixed Clamping Bolt - Form F
30	[德標] DIN 6306 (D) - 2002	帶移動卡式螺栓的定位銷釘 D型 Tommy Screws with Moveable Clamping Bolt - Type D
31	[德標] DIN 6306 (E) - 2002	帶移動卡式螺栓的定位銷釘 E型 Tommy Screws with Moveable Clamping Bolt - Type E
32	[德標] DIN 6900-2 - 1990	開槽螺釘和波形墊圈組合 Slotted Screws and Wave Washers Assemblies
33	[德標] DIN 6900-3 - 1990	鞍形彈簧墊圈與螺釘組合件 Screw and Washer Assemblies with Coarse Thread with Curved Spring Lock Washer
34	[德標] DIN 6900-4 - 1990	齒形彈簧墊圈與螺釘組合件 Screw and Washer Assemblies with Coarse Threaded Screws with Captive Serrated Lock Washer
35	[德標] DIN 6900-5 - 1990	錐形彈性墊圈與螺釘組合件 Assemblies With Coarse Threaded Screws and Captive Conical Spring Washer
36	[國際] ISO 2982-2 (Clip) - 2013	滾動軸承附件 - 鎖緊卡組件 Rolling Bearings - Accessories - Locking Clip Assemblies
37	[國際] ISO 10644 - 2009	螺絲和鋼制平墊圈組合件墊圈硬度200HV和300HV Screw and Washer Sssemblies Made of Steel with Plain Washers - Washer Hardness Classes 200 HV and 300 HV
38	[國際] ISO 10644 - 1998	螺絲和鋼制平墊圈組合件墊圈硬度200HV和300HV Screw and Washer Assemblies with Plain Washers - Washer Hardness Classes 200 HV and 300 HV
39	[日標] JIS B 1188 (T1A) - 1995	十字槽盤頭螺釘、平墊和彈墊組合件 Cross Recessed Pan Head Screws, Spring Lock Washer and Plain Washer Assemblles 供應商(2)
40	[日標] JIS B 1554 (AL/ALL) - 2016	鎖緊卡組件 Locking Clip and Applicable Bolt
41	[日標] JIS B 1130 - 2012	十字盤頭螺釘和平墊圈的組合 Cross Recessed Pan Screw Assemblies with Washers
42	[日標] JIS B 1130 - 2006	十字盤頭螺釘和平墊圈的組合 Cross Recessed Pan Screws and Plain Washers Assemblies
43	[日標] JIS B 1188 (T1B) - 1995	十字槽盤頭螺釘和彈墊組合 Cross Recessed Pan Head Screws And Spring Lock Washer Assembiles
44	[日標] JIS B 1188 (T1C) - 1995	十字盤頭螺釘和平墊圈組合 Cross Recessed Pan Head Screws And Plain Washer Assemblies
45	[日標] JIS B 1188 (T1D) - 1995	十字盤頭螺釘和外齒鎖緊墊圈組合 Cross Recessed Pan Head Screw And Serrated Lock Washer External Teeth Assemblies
46	[汽標代號] Q 230B	十字槽盤頭螺釘與平墊組合 Cross Recessed Pan Head Tapping Screws and Plain Washers Assemblies 供應商(1)
47	[汽標代號] Q 232	十字槽盤頭螺釘與彈墊組合 Cross Recessed Pan Head Screws and Spring Washer Assemblies 供應商(1)
48	[汽標代號] Q 234	十字槽盤頭螺釘與外鋸齒鎖緊墊圈組合 Cross Recessed Pan Head Screws and Serrated Lock Washers External Teeth Assemblies 供應商(1)
49	[汽標代號] Q 236B	十字槽盤頭螺釘與彈墊平墊組合 Cross Recessed Pan Head Screws Combine with Spring Washer and Plain Washers 供應商(2)
50	[汽標代號] Q 140B	六角頭螺栓與平墊圈組合件 Hex Head and Plain Washer Combination Bolt
51	[汽標代號] Q 240	十字槽沉頭螺釘與錐形外鋸齒鎖緊墊圈組合 Cross Recessed Countersunk Head Screws and Serrated Lock Washers External Teeth Assemblies
52	[汽標代號] Q 242	十字槽半沉頭螺釘與錐形外鋸齒鎖緊墊圈組合 Cross Recessed Countersunk Raised Head Screws and Serrated Lock Washers External Teeth Assemblies
53	[機械行業] JB /T 14723 - 2024	復合槽小盤頭螺釘和方形墊圈組合件 Complex Groove Small Pan Head Screw and Square Washer Assemblies 供應商(1)
54	[機械行業] JB /T 14724 - 2024	復合槽圓柱頭螺釘和瓦形墊圈組合件 Complex Groove Cap Head Screw and Tile Washer Assemblies
55	[機械行業] JB /T 7919.3 - 1999	鎖緊卡組件 Locking Clip Assemblies
56	[美標] ASME/ANSI B 18.13.1M - 2011	米制內六角圓柱頭螺釘和彈墊組合 SEMS [Table 1] Metric Socket Head Cap Screw and Spring Washer Assemblies-SEMS(Machine Screw Thread Diameter)
57	[美標] ASME/ANSI B 18.13.1M - 2011	米制開槽盤頭螺釘和彈墊組合 SEMS[Table 1] Metric Slotted Pan Head Screw and Spring Washer Assemblies-SEMS (Machine Screw Thread Diameter)
58	[美標] ASME/ANSI B 18.13 - 1996	內六角圓柱頭螺釘和彈墊組合SEMS [Table 1] Socket Head Cap Screw and Spring Washer Assemblies - SEMS
59	[美標] ASME/ANSI B 18.13 - 1996	開槽盤頭螺釘和彈墊組合 SEMS[Table 2] Slotted Pan Head Screw and Spring Washer Assemblies - SEMS
60	[法國] NF E 27-303 - 1968	帶孔球頭形螺釘 Spherical Holed Head Screw
61	[原電子工業部] SJ 2834 - 1987	十字盤頭螺釘和平墊圈的組合
62	[原電子工業部] SJ 2835 - 1987	十字槽盤頭螺釘和彈墊組合
63	[原電子工業部] SJ 2836 - 1987	十字盤頭螺釘和平、彈墊組合
64	[標準] YJT 4031	皇冠螺釘供應商(1)
65	[標準] YJT 4068 (GB9074.4T)	內六角花形槽盤頭平彈墊組合件 Hexalobular Socket Pan Head Screws, Single Coil Spring Lock Washer and Plain Washer Assembles 供應商(1)
66	[標準] YJT 4079 (GB 70.1 + GB 9074.13)	內六角圓柱頭螺釘和平墊、彈墊組合件 Hexagon Socket Head Cap Screws with Single Coil Lock Washer and Plain Washer Assemblies 供應商(3)
67	[標準] YJT 8021	十一槽子母鉚釘供應商(1)
68	[西門子] SN 60736	內六角花形盤頭螺釘組合件供應商(1)
69	[德標] DIN EN ISO 10644 - 2009	螺絲和鋼制平墊圈組合件墊圈硬度200HV和300HV Screw and Washer Assemblies Made of Steel with Plain Washers – Washer Hardness Classes 200 HV and 300 HV 供應商(1)
70	[德標] DIN EN ISO 10644 (S11)	內六角花形（梅花槽）盤頭螺釘和平墊圈組合件 Hexagon Lobular Socket Pan Head Screws and Washer Assemblies with Plain Washers 供應商(1)
71	[德標] DIN EN ISO 10644 (S3)	十字槽盤頭螺釘和平墊圈組合件 Cross Recessed Pan Head Screws and Washer Assemblies with Plain Washers
72	[德標] DIN EN ISO 10644 (S4)	內六角圓柱頭螺釘和平墊圈組合件 Hexagon Socket Head Cap Screws and Washer Assemblies with Plain Washers
73	[德標] DIN EN ISO 10644 (S5)	開槽盤頭螺釘和平墊圈組合件 Slotted Pan Head Screws and Washer Assemblies with Plain Washers
74	[德標] DIN EN ISO 10644 (S6)	開槽圓柱頭螺釘和平墊圈組合件 Slotted Cheese Head Screws and Washer Assemblies with Plain Washers
75	[德標] DIN EN ISO 10644 (S10)	內六角花形（梅花槽）圓柱頭螺釘和平墊圈組合件 Hexalobular Socket Head Cap Screws and Washer Assemblies with Plain Washers
76	[德標] DIN EN ISO 10644 (S12)	六角法蘭面螺栓和平墊圈組合件 Hexagon Flange Bolts and Washer Assemblies with Plain Washers
77	[德標] DIN EN ISO 10644 (S13)	六角法蘭面螺栓（細牙）和平墊圈組合件 Hexagon Flange Bolts (Fine Pitch Thread ) and Washer Assemblies with Plain Washers
78	[美標] ASME B 18.13 - 2017	內六角圓柱頭螺釘和彈墊組合 SEMS[Table 1] Helical Spring Lock Washers for Socket Head Cap Screw SEMS
79	[美標] ASME B 18.13 - 2017 (ERTA)	開槽盤頭螺釘和彈墊組合SEMS [Table 2] Slotted Pan Head Screw and Spring Washer Assemblies-SEMS