會員中心 | English | 繁體中文

航空航天強度≤1100Mpa 金屬材料標準桿短或中等長度MJ螺紋偏十字槽 100°沉頭螺釘 ISO 5856 - 2008

選擇規格尺寸點擊↓

030

040

050

060

070

080

100

120

140

160

180

200

ISO 5856 - 2008 航空航天強度≤1100Mpa 金屬材料標準桿短或中等長度MJ螺紋偏十字槽 100°沉頭螺釘

尺寸單位: mm

國際ISO 5856 - 2008 ISO5856 5856ISO 航空航天強度≤1100Mpa 金屬材料標準桿短或中等長度MJ螺紋偏十字槽 100°沉頭螺釘

掃一掃分享

公差最小破壞扭矩牌號等級

尺寸代碼

030

040

050

060

070

080

100

120

140

160

180

200

D
D₁	公稱
	有涂層 ①⑤	最大值
		最小值
	有涂層 ②	最大值
		最小值
	有涂層 ③	最大值
		最小值
	無涂層 ④	最大值
		最小值
	無涂層 ③	最大值
		最小值
D₂	最大值
D₃	最小值
D₄
D₅	公稱
	最大值
	最小值
D₆ ^⑥	最小值=公稱
	最大值
E	最小值
F	最大值
	最小值
H
L₁ ^⑦	±0.2
L₂	短的
	中等
L₃	短的
	中等

MJ3×0.5-4h6h	MJ4×0.7-4h6h	MJ5×0.8-4h6h	MJ6×1-4h6h	MJ7×1-4h6h	MJ8×1-4h6h	MJ10×1.25-4h6h	MJ12×1.25-4h6h	MJ14×1.5-4h6h	MJ16×1.5-4h6h	MJ18×1.5-4h6h	MJ20×1.5-4h6h
3	4	5	6	7	8	10	12	14	16	18	20
2.974	3.97	4.97	5.97	6.967	7.967	9.967	11.964	13.964	15.964	17.964	19.96
2.959	3.955	4.955	5.955	6.952	7.952	9.952	11.949	13.949	15.949	17.949	19.945
2.994	3.99	4.99	5.99	6.987	7.987	9.987	11.984	13.984	15.984	17.984	19.98
2.969	3.965	4.965	5.965	6.962	7.962	9.962	11.959	13.959	15.959	17.959	19.955
3	4	5	6	7	8	10	12	14	16	18	20
2.9	3.88	4.88	5.88	6.85	7.85	9.85	11.82	13.82	15.82	17.82	19.79
2.994	3.99	4.99	5.99	6.987	7.987	9.987	11.984	13.984	15.984	17.984	19.98
2.984	3.978	4.978	5.978	6.972	7.972	9.972	11.966	13.966	15.966	17.966	19.959
3	4	5	6	7	8	10	12	14	16	18	20
2.9	3.88	4.88	5.88	6.85	7.85	9.85	11.82	13.82	15.82	17.82	19.79
6	8	10	12	14	16	20	24	28	32	36	40
5.4	7.2	9	10.8	12.8	14.8	18.8	22.8	26.8	30.8	34.8	38.8
4.5	5.78	7.71	9	10.28	12.21	15.43	18	20.57	24.43	25.71	28.92
2.3	3	3.4	4.2	5.2	6.2	7.9	9.8	11.5	13.5	15.5	17.5
2.3	3	3.9	4.7	5.7	6.7	8.4	10.3	12	14	16	18
1.8	2.5	2.9	3.7	4.7	5.7	7.4	9.3	11	13	15	17
/	1.1	1.5	1.5	1.9	1.9	2.4	2.4	3	3	3.8	3.8
/	1.24	1.64	1.64	2.04	2.04	2.54	2.54	3.14	3.14	3.98	3.98
0.06	0.08	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1	0.1
0.63	0.93	0.96	1.26	1.57	1.6	1.93	2.53	3.14	3.2	4.35	4.68
0.55	0.85	0.88	1.18	1.49	1.52	1.85	2.45	3.06	3.12	4.27	4.6
1.27	1.69	2.12	2.54	2.96	3.39	4.23	5.08	5.93	6.77	7.62	8.47
3~30	3~40	4~50	5~60	6~70	6~80	8~100	10~120	10~140	10~160	11~180	12~200
6	7.5	9	10	11	11.5	14.5	16	19	20.5	22.5	24.5
7.5	10	12	14	15	16.5	20.5	22.5	26	28.5	31	33.5
/	5	6	7	7	7.5	9	10	12	12.5	14.5	15
/	6	7.5	8.5	9.5	10.5	13	14.5	17	18.5	21	22.5

①,涂裝前
②,緊公差
③,松公差（h12）
④,緊公差 (f7)
⑤,熱固化有機基體涂層，適用于精密公差的標準桿。
⑥,公差H13，單孔，可選
⑦,遞增長度：當 L1≤30時為1mm；當 30＜L1≤100時為2mm；當 L1＞100時為4mm。

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息

1	[國標] GB /T 819.1 - 2016	十字槽沉頭螺釘第1部分：4.8級 Countersunk Flat Head Screws (Common Head Style) with Cross Recess - Part 1: Property Class 4.8 供應商(10)
2	[國標] GB /T 819.2 - 2016	十字槽沉頭螺釘第2部分：8.8級、不銹鋼及有色金屬螺釘 Countersunk Flat Head Screws with Cross Recess - Part 2: Property Class 8.8, Stainless Steel Screws and Non-ferrous Metal Screws 供應商(1)
3	[國標] GB /T 819.1 - 2000	十字槽沉頭螺釘 4.8級 Countersunk Flat Head Screws (Common Head Style) with Cross Recess - Part 1: Property Class 4.8 供應商(10)
4	[國標] GB /T 819.2 - 1997	十字槽沉頭螺釘第2部分：鋼8.8級、不銹鋼A2-70和有色金屬螺釘CU2或CU3 Cross Recessed Countersunk Flat Head Screws (Common Head Style) - Grade A - Part 2: Steel of Property Class 8.8, Stainless and Non-Ferrous Metals 供應商(1)
5	[國標] GB /T 13806.1 (B) - 1992	精密機械用緊固件十字槽沉頭螺釘 Cross Recessed Countersunk Screws for Fine Mechanics 供應商(1)
6	[國標] GB 819 - 1985	十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws 供應商(10)
7	[國標] GB 819 - 1976	十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws 供應商(10)
8	[德標] DIN 965 - 1990	十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws 供應商(7)
9	[德標] DIN 34811 - 1999	塑料米字槽沉頭螺釘 Plastic Flat Head Screws with Cross Recess
10	[國際] ISO 7046 (-2) - 2011	8.8 級、不銹鋼及有色金屬十字槽沉頭螺釘 Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Property Class 8.8 供應商(1)
11	[國際] ISO 7046-2 - 1990	8.8 級、不銹鋼及有色金屬十字槽沉頭螺釘 Cross Recessed Countersunk Flat Head Screws (Common Head Style) - Grade A - Steel of Property Class 8.8, stainless Steel and Nonferrous Metals 供應商(1)
12	[國際] ISO 7046 (-1) - 2011	4.8級十字槽沉頭螺釘 Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Steel Screws of Property Class 4.8
13	[國際] ISO 7046-1 - 1994	十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws
14	[日標] JIS B 1111 (T6) - 2017	十字槽沉頭螺釘 4.8級 [表6] Cross Recessed Countersunk Head Screws - Class 4.8
15	[日標] JIS B 1111 (T9) - 2017	十字槽沉頭螺釘 8.8級 [表9] Cross Recessed Countersunk Head Screws - Class 8.8
16	[日標] JIS B 1111 (JA4) - 2017	十字槽沉頭螺釘 [附屬表 JA.4] Cross Recessed Countersunk Head Screws
17	[日標] JIS B 1111 (T2) - 2006	十字槽沉頭螺釘 4.8級 [表2] Cross Recessed Countersunk Head Screws - Class 4.8
18	[日標] JIS B 1111 (T3) - 2006	十字槽沉頭螺釘 8.8級 [表3] Cross Recessed Countersunk Head Screws - Class 8.8
19	[日標] JIS B 1111 (T3) - 1996	十字槽沉頭螺釘 8.8級 [表3] Cross Recessed Countersunk Head Screws - Class 8.8
20	[日標] JIS B 1111 (T2) - 1996	十字槽沉頭螺釘 4.8級 [表2] Cross Recessed Countersunk Head Screws - Class 4.8
21	[汽標代號] Q 254	十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws
22	[美標] ASME/ANSI B 18.6.3 - 2010	十字槽沉頭螺釘Table2 Cross Recessed Countersunk Head Screws 供應商(2)
23	[美標] ASME/ANSI B 18.6.7M - 1998	米制十字槽沉頭螺釘Table3 Metric Cross Recessed Countersunk Screws
24	[美標] ASME/ANSI B 18.6.7M - 1998	米制米字槽沉頭螺釘Table4 Metric PZ Drives Countersunk Head Screws
25	[歐標] EN 4162 - 2016	航空航天 - 100°沉頭螺釘偏十字槽鍍鎘合金鋼中等螺紋長度粗公差普通桿等級：1100MPa(室溫)/235℃ Aerospace Series - Screws, 100° Countersunk Normal Head, Offset Cruciform Recess, Coarse Tolerance Normal Shank, Medium Length Thread, in Alloy Steel, Cadmium Plated - 1100 MPa (at Ambient Temperature)/235 °C
26	[歐標] EN 2940 - 1995	航空航天系列鍍銀FE-PA92HT(A286)耐熱鋼制全螺紋偏置十字凹槽100°沉頭螺釘等級:900MPa(環境溫度)/650℃ Aerospace Series - Screws, 100° Countersunk Head, Offset Cruciform Recess, Threaded To Head, in Heat Resisting Steel Fe-pa92ht (A286), Silver Plated - Classification: 900 Mpa (At Ambient Temperature)/650℃
27	[意大利] UNI 7688 - 1977	十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws
28	[法國] NF E 25-119-1 - 1994	4.8級十字槽沉頭螺釘 Countesunk Flat Head Screws,with Type H or Type Z Cross Recessed - Product Grade A, Class 4.8
29	[法國] NF E 25-119-2 - 1994	8.8級十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws - Grade A, Class 8.8
30	[法國] NF L 22-161 - 1984	十字槽100°沉頭螺栓符合N FL22-072 Bolt, 100 Degrees Countersunk Head, Current Use, NF L 22-072 Cross Recess
31	[英標] BS 1981 - 1991	米字槽沉頭螺釘（短的）Table 7 Recessed Truncated Countersunk Head Screws:short Length
32	[英標] BS 1981 - 1991	米字槽沉頭螺釘Table4 Recessed Truncated Countersunk Head Screws: Long Length
33	[英標] BS 450 - 1958	英制十字槽沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 2] Cross Recessed 90° Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 2]
34	[澳標] AS /NZS 1427 - 1996	米制十字槽沉頭螺釘 [Table 1] ISO Metric Cross-Recess Countersunk Screws [Table 1]
35	[臺灣] CNS 4560 - 1981	十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws
36	[俄標] GOST 17475 - 1980	十字槽沉頭螺釘 A級和B級 Countersunk Head Screws of Accuracy Classes A and B (Cross Recessed)
37	[韓標] KS B 1023 (T7) - 2016 (R2021)	4.8級十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws - Class 4.8
38	[韓標] KS B 1023 (T8) - 2016 (R2021)	8.8級及有色金屬十字槽沉頭螺釘 Non-ferrous Metal Cross Recessed Countersunk Head Screws - Class 8.8
39	[韓標] KS B 1023 (T2) - 2001	4.8級十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws - Class 4.8
40	[韓標] KS B 1023 (T3) - 2001	8.8級及有色金屬十字槽沉頭螺釘 Non-ferrous Metal Cross Recessed Countersunk Head Screws - Class 8.8
41	[德標] DIN EN ISO 7046-1 - 2011	十字槽沉頭螺釘（通用頭型）- 4.8級，鋼制，產品等級A級 Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - Part 1: Steel Screws of Property Class 4.8 供應商(7)
42	[德標] DIN EN ISO 7046-2 - 2011	8.8 級、不銹鋼及有色金屬十字槽沉頭螺釘 Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A - property Class 8.8 供應商(6)
43	[軍標] GJB 3371 (/57~/60) - 1998	十字槽100°沉頭螺栓 Cross Recessed 100° Countersunk Head Screws
44	[軍標] GJB 3371 (/62) - 1998	光桿公差帶f9 十字槽100°沉頭螺栓 Cross Recessed 100° Countersunk Head Screws，Shank Tolerance f9
45	[軍標] GJB 3371 (/64) - 1998	光桿公差帶h8短螺紋十字槽 100°沉頭螺栓 Cross Recessed 100° Countersunk Head Screws, Short Thread, Shank Tolerance h8
46	[軍標] GJB 3371 (/68) - 1998	十字槽 100°錐端沉頭螺栓 Cross Recessed 100° Countersunk Head Screws with Cone Point
47	[軍標] GJB 3371 (/84) - 1998	光桿公差帶r6短螺紋十字槽 100°沉頭螺栓 Cross Recessed 100° Countersunk Head Screws, Short Thread, Shank Tolerance r6
48	[軍標] GJB 3372 (/45~/48) - 1998	十字槽100°沉頭螺釘 Cross Recessed 100° Countersunk Head Screws
49	[軍標] GJB 3372 (/49~/52) - 1998	十字槽100°小沉頭螺釘 Cross Recessed 100 ° Small Countersunk Head Screw
50	[軍標] GJB 3374 (/29) - 1998	MJ螺紋十字槽100°沉頭螺栓 100° Countersunk Head Bolts with MJ Thread, Cross-recessed
51	[軍標] GJB 3374 (/30) - 1998	MJ螺紋光桿公差帶f9十字槽100°沉頭螺栓 100° Countersunk Head Bolts with MJ Thread, Cross-recessed, Shank Tolerance f9
52	[軍標] GJB 3374 (/31) - 1998	MJ螺紋十字槽100°沉頭錐端螺栓 100° Countersunk Head Bolts with MJ Thread, Cross-recessed
53	[軍標] GJB 3374 (/32) - 1998	MJ螺紋光桿公差帶h8短螺紋十字槽100°沉頭螺栓 100° Countersunk Head Bolts with MJ Thread, Cross-recessed, Short Thread, Shank Tolerance h8
54	[軍標] GJB 3374 (/33) - 1998	MJ螺紋光桿公差帶r6短螺紋十字槽100°沉頭螺栓 100° Countersunk Head Bolts with MJ Thread, Cross-recessed, Short Thread, Shank Tolerance r6
55	[印標] IS 7485 (-1) - 2005	H型或Z型十字槽沉頭螺釘（普通頭）產品等級A Countersunk Flat Head Screws (Common Head Style) with Type H or Type Z Cross Recess - Product Grade A
56	[印標] IS 7485 - 1985 (R2001)	十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws
57	[波蘭標] PN 82208	90°米字槽沉頭螺釘 90° Cross Recess Countersunk Flat Head Screws
58	[美標] ASME B 18.6.3 (H1B-I/H1B-IA) - 2024	82°十字槽沉頭螺釘 (ASTM F837/F468) [TABLE 2.2.1-2 I/IA] 82° Cross Recessed Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-2 I/IA] 供應商(2)
59	[美標] ASME B 18.6.3 (T2-I/T2-IA) - 2013	82°十字槽沉頭螺釘 [Table 2] (ASTM F837, F468) 82° Cross Recessed Countersunk Head Screws [Table 2] (ASTM F837, F468) 供應商(2)
60	[美標] ASME B 18.6.3 (H1D-I/H1D-IA) - 2024	100°十字槽沉頭螺釘 (ASTM F837/F468) [TABLE 2.2.1-4 I/IA] 100° Cross Recessed Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-4 I/IA]
61	[美標] ASME B 18.6.3 (H1F-I/H1F-IA) - 2024	精密100°沉頭十字槽機械螺釘 [TABLE 2.2.1-6 I/IA] Close Tolerance 100-deg Flat Countersunk Head Screws [TABLE 2.2.1-6 I/IA]
62	[美標] ASME B 18.6.3 (H3B-I/H3B-IA) - 2024	十字槽82°沉頭清根機械螺釘 I型和IA型 [TABLE 2.2.3-2 I/IA] Undercut 82-deg Flat Countersunk Head Screws,Type I and IA [TABLE 2.2.3-2 I/IA]
63	[美標] ASME B 18.6.3 (H4A) - 2024	82°小沉頭十字槽螺釘 (ASTM F837/F468) [TABLE 2.2.4-1,-2 I/IA] 82° Flat Coutersunk Trim Head Screws (ASTM F837/F468) [TABLE 2.2.4-1,-2 I/IA]
64	[美標] ASME B 18.6.3 (T13) - 2013	82°小沉頭十字槽螺釘 [Table 13] (ASTM F837 / F468) 82° Flat Coutersunk Trim Head Screws [Table 13] (ASTM F837 / F468)
65	[美標] ASME B 18.6.3 (T4-I/T4-IA) - 2013	100°十字槽沉頭螺釘 [Table 4] (ASTM F837, F468) 100° Cross Recessed Countersunk Head Screws [Table 4] (ASTM F837, F468)
66	[美標] ASME B 18.6.3 (T6-I/T6-IA) - 2013	100°十字槽沉頭精整螺釘 Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only)
67	[美標] ASME B 18.6.3 (T10-I/T10-IA) - 2013	十字槽82°沉頭清根機械螺釘 Undercut 82-deg Flat Countersunk Head Screws，Type I and IA
68	[航天] QJ 2584 (A) - 2011	鈦合金十字槽沉頭螺釘 Countersunk Head Screws with Cross Recess in Titanium Alloys
69	[航天] QJ 2584 - 1993	鈦合金十字槽沉頭螺釘 Countersunk Head Screws with Cross Recess in Titanium Alloys
70	[航天] QJ 2377 - 1992	十字槽沉頭螺釘 Cross Recessed Countersunk Head Screws
71	[航空] HB 1- 208 - 1995	十字槽120°沉頭螺釘 Cross Recess 120° Countersunk Head Screw 供應商(1)
72	[航空] HB 1-206 - 2002	十字槽90°沉頭螺釘 90° Countersunk Head Screw with Cross Recess
73	[航空] HB 7196~7199 (7196/7197/7198/7199) - 1995	十字槽100°沉頭螺釘（帶孔或不帶孔） Cross Recessed 100° Countersunk Head Screws
74	[航空] HB 6565 - 1992	鈦合金光桿公差帶f9高扭矩十字槽100°沉頭螺栓 Titanium Alloy Smooth Rod Tolerance Zone f9 High Torque Cross Groove 100° Countersunk Head Bolt
75	[深圳緊固件行業協會標準] T/SZJGJ 001 (E) - 2024	十字槽沉頭機器螺釘 Cross Recessed Countersunk Head Screws