十字槽六角凸緣頭螺釘 [TABLE 2.2.10-2 I] ASME B 18.6.3 (H10B-I) - 2024
| 選擇規格尺寸 點擊↓ 4# 5# 6# 8# 10# 12# 1/4 5/16 3/8 |
尺寸單位:
inch |
|
![ASME B 18.6.3 (H10B-I) - 2024 十字槽六角凸緣頭螺釘 [TABLE 2.2.10-2 I]](https://img.164580.com/upload/48/pic_cadpara/1493_zh.png?ue=1761518298&local=cache&tp=canvas&pict=png)
![美標ASME B18.6.3 (H10B-I) - 2024 ASME18.6. 十字槽六角凸緣頭螺釘 [TABLE 2.2.10-2 I]](https://img.164580.com/upload/48/pic/2023/11/17/1700206050854882589.jpg)
![ASME B 18.6.3 (H10B-I) - 2024 十字槽六角凸緣頭螺釘 [TABLE 2.2.10-2 I]](https://img.164580.com/upload/48/qrcode_standardurl/24960.png)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,允許六角面所有邊緣和棱角略有圓鈍。 ②,六角面與凸緣頂面結合處的圓角半徑R不得大于螺釘公稱直徑的0.15倍。 ③,若以小數規定公稱直徑，應省略小數前和小數點后第四位的零。 ④,十字槽插入測量深度由凹穴槽深和十字槽插入深度兩部分組成，由于凹穴槽深的變化是客觀存在的，故十字槽插入測量深度可由制造者和用戶協商確定。 |
同版本產品組
長度公差
Machine screws can be made to any length, but they are generally produced in fractional length increments of 1/16 in. for screws up to 5/8 in. long, 1/8 in. for screws over 5/8 in. through 1-1/2 in. long, and 1/4 in. for screws over 1-1/2 in. long.
標稱螺釘尺寸的長度公差 | |||
標稱螺釘長度 | 螺紋規格 | ||
0000~00 | 0~12 | 1/4~3/4 | |
≤1/2 | -0.01 | -0.02 | -0.03 |
＞1/2,≤1 | -0.02 | -0.03 | -0.03 |
＞1,≤2 | / | -0.06 | -0.06 |
＞2 | / | -0.09 | -0.09 |
類似標準及供貨信息
| 1 |
![六角頭凸緣（帶墊）螺栓 1型 [Table JA.2]](http://img.164580.com/upload/48/pic/2023/11/17/1700201088392116642.jpg)
|
[日標] JIS B 1189 (Type 1) - 2014 |
六角頭凸緣（帶墊）螺栓 1型 [Table JA.2] Hexagon Bolt with flange (Collar) - Type 1 - [Table JA.2] 供應商(1) |
| 2 |
|
[日標] JIS B 1189 (Type 1) - 2005 |
六角頭帶墊螺栓 1型 Hexagon Flange with Flat Upper Face Bolt - Type 1 [Attached Table 1] 供應商(1) |
| 3 |
|
[日標] JIS B 1189 (Class 1) - 1977 |
六角頭墊圈面螺栓 1型 Hexagon Bolts with Collar - Class 1 供應商(1) |
| 4 |
|
[法國] NF E 27-711 - 1982 |
六角凸緣螺栓 8.8級、10.9級 Hexagon Bolt with Collar |
| 5 |
|
[澳標] AS /NZS 1427 - 1996 |
米制小系列六角頭帶介螺栓 ISO Metric Small Series Hexagon Washer Head Screws |
| 6 |
![開槽和無槽六角凸緣頭（墊圈頭）螺釘 (ASTM F837,F468) [TABLE 2.2.10-1]](http://img.164580.com/upload/48/pic/2023/11/17/1700200986084395472.jpg)
|
[美標] ASME B 18.6.3 (H10A) - 2024 |
開槽和無槽六角凸緣頭（墊圈頭）螺釘 (ASTM F837,F468) [TABLE 2.2.10-1] Plain and Slotted Hex Washer Head Screws (ASTM F837,F468) [TABLE 2.2.10-1] |
| 7 |
![梅花槽六角凸緣頭螺釘 [TABLE 2.2.10-2 VI]](http://img.164580.com/upload/48/pic/2023/11/17/1700206021249998460.jpg)
|
[美標] ASME B 18.6.3 (H10B-VI) - 2024 |
梅花槽六角凸緣頭螺釘 [TABLE 2.2.10-2 VI] Recess Dimensions for Indented Hex Washer Head Screws, Type VI [TABLE 2.2.10-2 VI] |
| 8 |
|
[美標] ASME B 18.6.3 (T32) - 2013 |
開槽和無槽六角凸緣頭（墊圈頭）螺釘 [Table 32] (ASTM F837, F468) Plain and Slotted Hex Washer Head Screws [Table 32] (ASTM F837, F468) |
| 9 |
|
[美標] ASME B 18.6.3 (T33-I) - 2013 |
十字槽六角凸緣頭螺釘 Cross Recess Dimensions for Indented Hex Washer Head Screws |
| 10 |
|
[美標] ASME B 18.6.3 (T33-VI) - 2013 |
梅花槽六角凸緣頭螺釘 Recess Dimensions for Indented Hex Washer Head Screws，Type VI |