會員中心 | English | 繁體中文

開槽沉頭螺釘 DIN 963 - 1990

查看供應商

選擇規格尺寸點擊↓

M1.2

M1.4

M1.6

M2.5

(M3.5)

M10

M12

(M14)

M16

(M18)

M20

括號內尺寸為非優選

尺寸單位: mm

模型下載

模型下載替

掃一掃分享

單重計算公差公制螺紋極限尺寸米/英制螺紋對照螺紋直徑與受力截面積最小破壞扭矩牌號等級毛坯直徑

千件重及價格計算千件重 : kg x 元/kg = 元/千件

默認密度 g/cm³

螺紋尺寸
d

M1.2

M1.4

M1.6

M2.5

(M3.5)

P	螺距
a	最大值
d_k	最大值=公稱
d_k	最小值
k	最大值
n	最大值
n	最小值
r	最大值
t	最大值
t	最小值
x	最大值

0.25	0.25	0.3	0.35	0.4	0.45	0.5	0.6	0.7
0.5	0.5	0.6	0.7	0.8	0.9	1	1.2	1.4
1.9	2.3	2.6	3	3.8	4.7	5.6	6.5	7.5
1.76	2.06	2.46	2.86	3.5	4.4	5.3	6.14	7.14
0.6	0.72	0.84	0.96	1.2	1.5	1.65	1.93	2.2
0.45	0.5	0.5	0.6	0.7	0.8	1	1	1.2
0.31	0.36	0.36	0.46	0.56	0.66	0.86	0.86	1.06
0.1	0.12	0.14	0.16	0.2	0.25	0.3	0.35	0.4
0.3	0.35	0.4	0.45	0.6	0.7	0.85	1	1.1
0.2	0.25	0.28	0.32	0.4	0.5	0.6	0.7	0.8
-	-	-	0.9	1	1.1	1.25	1.5	1.75

千件鋼制重≈kg

螺紋長度b

最小值

螺紋尺寸
d

M10

M12

(M14)

M16

(M18)

M20

P	螺距
a	最大值
d_k	最大值=公稱
d_k	最小值
k	最大值
n	最大值
n	最小值
r	最大值
t	最大值
t	最小值
x	最大值

0.8	1	1.25	1.5	1.75	2	2	2.5	2.5
1.6	2	2.5	3	3.5	4	4	5	5
9.2	11	14.5	18	22	25	29	33	36
8.84	10.57	14.07	17.57	21.48	24.48	28.48	32.38	35.38
2.5	3	4	5	6	7	8	9	10
1.51	1.91	2.31	2.81	3.31	3.31	4.37	4.37	5.37
1.26	1.66	2.06	2.56	3.06	3.06	4.07	4.07	5.07
0.5	0.6	0.8	1	1.2	1.4	1.6	1.8	2
1.3	1.6	2.1	2.6	3	3.5	4	4.5	5
1	1.2	1.6	2	2.4	2.8	3.2	3.6	4
2	2.5	3.2	3.8	4.4	5	5	6.3	6.3

千件鋼制重≈kg

螺紋長度b

最小值

①,材料：
a)鋼，強度等級(材料)：4.8,5.8,8.8. 標準DIN ISO 898-1
b)不銹鋼，強度等級(材料)：A2-70，A4-70. 標準DIN 267-11
c)有色金屬，強度等級(材料)：CuZn=銅鋅合金，CU2或CU3由制造商選擇。標準DIN 267-18
d)其他強度等級或材料或某種材料，例如 CU3，按協議

替代列表

DIN 963 - 1990 DIN EN ISO 2009 - 2011

等效標準

國標 GB	國際 ISO	德標 DIN	法國 NF
GB /T 68	ISO 2009	DIN EN ISO 2009	NF E 25-123

以上有部分標準可能為近似等效，如有異議以標準原件為準

技術條件和引用標準

材料

鋼

不銹鋼

有色金屬

通用要求
螺紋	公差
	標準
機械性能	等級
	標準
公差	產品等級
	標準
表面處理	-
	-
表面粗糙度
表面缺陷
驗收及包裝
備注

DIN 267 part 1
≤ M1.4：6h ＞M1.4：6g^①
DIN 13 part 13,15
4.8，5.8，8.8	A2-70，A4-70	CuZn = 銅鋅合金 CU2或CU3由制造商選擇
DIN ISO 898 part 1	DIN 267 part 11	DIN 267 part 18
A
DIN ISO 4759 part 1
不經處理 8.8：blackened （thermally or chemically）	blank	blank
電鍍 DIN 267 part 9
DIN 267 part 2
DIN 267 part 19
DIN 267 part 5
① Only for screws without surface protection. 6 g makes it possible for normal coating thicknesses to be applied in accordance with DIN 267 part 9, the reference line not being exceeded. Depending on the coating thickness required, a larger fundamental deviation shall be selected than that for the g position. This might, however, impair the resistance to stripping of the bolt / nut assembly.

引用參考

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 3106 - 2016

緊固件 - 螺栓、螺釘和螺柱 - 公稱長度和螺紋長度 (ISO 888:2012, MOD)

GB /T 3 - 1997

普通螺紋收尾、肩距、退刀槽和倒角 (ISO 3508:1976 / ISO 4755:1983)

GB /T 5779.1 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 一般要求

GB /T 5779.3 - 2000

緊固件表面缺陷 - 螺栓、螺釘和螺柱 - 特殊要求

注：技術數據僅供參考，請以官方原件為準！

告訴我在“易緊通”看到，將給您優惠

惠州市昇滬汽車緊固件科技有限公司

聯系人：黃俊輝

1540428407 移動電話： 13828802165 電話：0752-3951888, 3951820, 3951821, 3951825, 3951826

材質：1008鋼、1018#碳鋼、Q235碳鋼、35#合金鋼、304HC不銹鋼、316HC不銹鋼，表面處理：環保彩鋅、環保藍白鋅、環保黑鋅、環保鎳、熱鍍鋅、達克羅、以及非環保電鍍，規格：齊全

[詢價]

東臺勃林邦五金科技有限公司

聯系人：徐明光

278446734@qg.com 移動電話： 13305198373（徐明光）；15358251989（柳崇興）電話：0515-85521989

材質：不銹鋼304，316；規格范圍：M2-M8；支持非標定制

[詢價]

蘇州永創緊固件廠

聯系人：湯繼勇

546348066 移動電話： 15298892886 電話：0512-66700967

材質：不銹鋼、碳鋼；公稱直徑范圍：M1-M14；公稱長度范圍：5-400mm

[詢價]

浙江三林五金制品有限公司

聯系人：陳虹萍

344165098 移動電話： 13067668658 電話：13067668658 微信號：13067668658

材質：黃銅H62；規格范圍：M2-M10；公稱長度：4-80mm；表面處理：藥黃、鍍鎳等。

[詢價]

告訴我在“易緊通”看到，將給您優惠

類似標準及供貨信息

1	[國標] GB /T 68 - 2016	開槽沉頭螺釘 Slotted Countersunk Flat Head Screws 供應商(6)
2	[國標] GB /T 68 - 2000	開槽沉頭螺釘 Slotted Countersunk Head Screws (Commen Head Style) 供應商(6)
3	[國標] GB 68 - 1985	開槽沉頭螺釘 Slotted Countersunk Head Screws 供應商(6)
4	[國標] GB 948 - 1988	開槽沉頭不脫出螺釘 Slotted Countersunk Head Screws with Waisted Shank
5	[美標] IFI 513 - 1982	米制開槽沉頭機械螺釘 Table 2 Metric Slotted Flat Countersunk Head Machine Screws
6	[德標] DIN 7969 - 2017	鋼結構用帶六角螺母的開槽沉頭螺栓 Slotted Countersunk Head Bolts with Hexagon Nut for Steel Structures
7	[德標] DIN 7969 - 1989	鋼結構用帶六角螺母的開槽沉頭螺栓 Slotted Countersunk Head Screws for Structural Steel Bolting for Supply with or Without Nuts
8	[德標] DIN 8245 - 1972	開槽沉頭（平頭）螺釘 - 適用于精密機械；M0.4至M1.4 Slotted Countersunk (Flat) Head Screws for Fine Mechanics; M 0.4 to M 1.4
9	[國際] ISO 2009 - 2011	開槽沉頭螺釘（通用頭型） - 產品等級A級 Slotted Countersunk Flat Head Screws (Common Head Style) - Product Grade A
10	[國際] ISO 2009 - 1994	開槽沉頭螺釘（通用頭型） - 產品等級A級 Slotted Countersunk Flat Head Screws (common Head Style) - Product Grade A
11	[日標] JIS B 1101 (T8) - 2017	開槽沉頭螺釘表8 Slotted Countersunk Head Screws - Table 8
12	[日標] JIS B 1101 (JA4) - 2017	開槽沉頭螺釘附表JA.4 Slotted Countersunk Head Screws - Table JA.4
13	[日標] JIS B 1116 (T4) - 2009	精密機械用開槽沉頭螺釘 Slotting Countersunk Head Screws for Fine Mechanics
14	[日標] JIS B 1101 (AAT2) - 1996	開槽沉頭螺釘附表2 [Annex Attached Table 2] Slotted Countersunk Head Screws [Annex Attached Table 2]
15	[日標] JIS B 1101 (AT3) - 1996	開槽沉頭螺釘表3 [Attached Table 3] Slotted Countersunk Head Screws [Attached Table 3]
16	[日標] JIS B 1179 (T1-1) - 1994	開槽沉頭螺栓 (精制) [Table 1-1] Slotted Flat Head Bolts, Fine Finished [Table 1-1]
17	[日標] JIS B 1179 (T1-2) - 1994	開槽沉頭螺栓 (粗制）[Table 1-2] Slotted Flat Head Bolts, Rough Finished [Table 1-2]
18	[美標] ASME/ANSI B 18.6.7M - 1998	米制開槽沉頭螺釘Table2 Metric Soltted Countersunk Screws 供應商(1)
19	[美標] ASME/ANSI B 18.6.3 - 2010	80°開槽沉頭螺釘Table1 80° Slotted Flat Countersunk Head Machine Screws
20	[美標] ASME/ANSI B 18.6.3 - 2010	100°開槽沉頭螺釘Table3 Slotted 100 Deg Flat Countersunk Head Screws (Machine screws only)
21	[美標] ASME/ANSI B 18.6.3 - 2010	緊公差100°開槽沉頭螺釘Table5 Close Tolerance 100 Degree Slotted Countersunk Head Screws
22	[美標] ASME/ANSI B 18.6.3 - 2010	80°開槽沉頭清根螺釘Table9 80° Slotted Undercut 82-deg Flat Countersunk Head Machine Screws
23	[美標] ASME/ANSI B 18.6.2 (T1) - 1998 (R2010)	開槽沉頭螺釘 [Table 1] (A307, SAE J429, F468, F593) Slotted Flat Countersunk Head Cap Screws [Table 1] (A307, SAE J429, F468, F593)
24	[美標] ASME/ANSI B 18.11 - 1961 (R1983)	開槽100°沉頭小螺釘 [Table 3] Slotted 100° Flat Head Miniature Screws
25	[意大利] UNI 6109	開槽沉頭螺釘 Slotted Countersunk Flat Head Screws
26	[法國] NF E 25-123 - 1994	開槽沉頭螺釘 Slotted Countersunk Flat Head Screws - Product Grade A
27	[法國] NF F 03-004 (F) - 1983	鐵路車輛沉頭側切口機械螺釘 Railway Rolling Stock Grade A Countersunk Notched Head Machine
28	[法國] NF F 03-016 - 1983	鐵路車輛開槽沉頭螺釘/螺母 A級符號FP Railway Rolling Stock Grade A Slotted Countersunk Head Screws Nuts Symbol FP
29	[英標] BS 1981 - 1991	開槽沉頭螺釘（短的）Table 6 Slotted Truncated Countersunk Head Screws: Short Length
30	[英標] BS 1981 - 1991	開槽沉頭螺釘Table4 Slotted Countersunk Flat Head Screws
31	[英標] BS 4183 (T2) - 1967	開槽沉頭機械螺釘 Slotted Countersunk Head Machine Screws. Metric Series
32	[英標] BS 450 - 1958	英制開槽沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 2] Slotted 90°Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 2]
33	[澳標] AS /NZS 1427 - 1996	米制開槽沉頭螺釘 [Table 1] ISO Metric Slotted Countersunk Head Screws [Table 1]
34	[臺灣] CNS 9678 - 1982	精密機械用開槽沉頭螺釘 Slotted Countersunk Screws for Fine Mechanics
35	[臺灣] CNS 4411 - 1981	開槽沉頭螺釘 Slotted Countersunk Head Screws
36	[臺灣] CNS 4420 - 1981	開槽沉頭螺栓 Slotted Countersunk Head Bolts
37	[臺灣] CNS 4363 - 1980	精密用開槽沉頭螺釘 M0.4～M1.4 Slotted Countersunk Head Screws for Fine Mechanics
38	[俄標] GOST 17475 - 1980	開槽沉頭螺釘 A級和B級 Countersunk Head Screws of Accuracy Classes A and B（Slotted）
39	[韓標] KS B 1021 (T5) - 2012 (R2022)	開槽沉頭螺釘 [Table 5] Slotted Countersunk Flat Head Screws [Table 5]
40	[德標] DIN EN ISO 2009 - 2011	開槽沉頭螺釘(通用頭型) A級 Slotted Countersunk Flat Head Screws(Common Head Style)-Product Grade A 供應商(4)
41	[軍標] GJB 3371 (/61) - 1998	光桿公差帶f9 100°沉頭螺栓 100° Countersunk Head Bolts，Shank Tolerance f9
42	[軍標] GJB 3372 (/36~/44) - 1998	100°開槽沉頭螺釘 Slotted 100 Deg Flat Countersunk Head Screws
43	[軍標] GJB 3372 (/56) - 1998	100°沉頭不脫出螺釘 Slotted 100 Deg Flat Countersunk Head Screws, Waisted Shank
44	[印標] IS 1365 - 2005	開槽沉頭螺釘（通用頭型） - 產品等級A級 Slotted Countersunk Flat Head Screws (Common Head Style) - Product Grade A
45	[美標] ANSI B 18.11 - 1961 (R2017)	開槽100°沉頭小螺釘 [Table 3] (A276, B16, B151) Slotted 100°Flat Head Miniature Screws [Table 3] (A276, B16, B151)
46	[美標] ASME B 18.6.3 (H1A) - 2024	82°開槽沉頭機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-1] 82° Slotted Flat Countersunk Head Machine Screws (ASTM F837/F468) [TABLE 2.2.1-1]
47	[美標] ASME B 18.6.3 (H1C) - 2024	100°沉頭開槽機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-3] Slotted 100-deg Flat Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-3]
48	[美標] ASME B 18.6.3 (H1E) - 2024	精密100°沉頭開槽機械螺釘 (ASTM F837/F468) [TABLE 2.2.1-5] Slotted Close Tolerance 100-deg Flat Countersunk Head Screws (ASTM F837/F468) [TABLE 2.2.1-5]
49	[美標] ASME B 18.6.3 (H3A) - 2024	開槽82°沉頭清根機械螺釘 (ASTM F837/F468) [TABLE 2.2.3-1] Slotted Undercut 82-deg Flat Countersunk Head Machine Screws (ASTM F837/F468) [TABLE 2.2.3-1]
50	[美標] ASME B 18.6.3 (T1) - 2013	82°開槽沉頭機械螺釘 [Table 1] (ASTM F837 / F468) 82° Slotted Flat Countersunk Head Machine Screws [Table 1] (ASTM F837 / F468)
51	[美標] ASME B 18.6.3 (T3) - 2013	100°沉頭開槽機械螺釘 [Table 3] (ASTM F837 / F468) Slotted 100-deg Flat Countersunk Head Screws [Table 3] (ASTM F837 / F468)
52	[美標] ASME B 18.6.3 (T5) - 2013	開槽精密100°沉頭機械螺釘 [Table 5] (ASTM F837 / F468) Slotted Close Tolerance 100-deg Flat Countersunk Head Screws (Machine Screws Only) (ASTM F837 / F468)
53	[美標] ASME B 18.6.3 (T9) - 2013	開槽82°沉頭清根機械螺釘 [ Table 9 ] (ASTM F837 / F468) Slotted Undercut 82-deg Flat Countersunk Head Machine Screws (ASTM F837 / F468)
54	[航天] QJ 2370 - 1992	開槽沉頭螺栓 Slotted Countersunk Head Screws
55	[航天] QJ 2373 - 1992	開槽沉頭螺釘 Slotted Countersunk Head Screws
56	[航空] HB 7187~7195 - 1995	100°開槽沉頭螺釘 100° Countersunk Head Bolts
57	[航空] HB 7208~7216 - 1995	100°開槽沉頭螺釘 Slotted 100 Deg Flat Countersunk Head Screws

開槽沉頭螺釘 DIN 963 - 1990

相關材料標準或牌號

技術條件和引用標準

引用參考