82° 開槽半沉頭機械螺釘(ASTM F837/F468) [TABLE 2.2.2-1] ASME B 18.6.3 (H2A) - 2024
| 選擇規格尺寸 點擊↓ 00# 0# 1# 2# 3# 4# 5# 6# 8# 10# 12# 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 |
尺寸單位:
inch |
|
![ASME B 18.6.3 (H2A) - 2024 82° 開槽半沉頭機械螺釘(ASTM F837/F468) [TABLE 2.2.2-1]](https://img.164580.com/upload/48/pic_cadpara/1476_zh.png?ue=1761528041&local=cache&tp=canvas&pict=png)
![美標ASME B18.6.3 (H2A) - 2024 ASME18.6.3 1 82° 開槽半沉頭機械螺釘(ASTM F837/F468) [TABLE 2.2.2-1]](https://img.164580.com/upload/48/pic/2023/12/11/1702262053687142900.jpg)
![ASME B 18.6.3 (H2A) - 2024 82° 開槽半沉頭機械螺釘(ASTM F837/F468) [TABLE 2.2.2-1]](https://img.164580.com/upload/48/qrcode_standardurl/24915.png)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,頭部邊緣為倒圓或平的。 ②,小于等于表中長度的螺釘，為清根沉頭型。 ③,光桿直徑應不小于2A級螺紋最小中徑，并不大于公稱（基本）螺紋大徑。 ④,機械螺釘的螺紋長度： 1）螺紋規格≤5#: 公稱長度≤3倍公稱直徑的應為滿扣產品，頭下螺紋肩距≤1倍螺距。 公稱長度＞3倍公稱直徑到 1-1/8 in 的，允許頭下肩距最大不超過2倍螺距。 若無其他規定，長螺釘的最小螺紋長度為1 in 。 2）螺紋規格≥6#: 公稱長度≤3倍公稱直徑的應為滿扣產品，頭下螺紋肩距≤1倍螺距。 公稱長度＞3倍公稱直徑到 2 in 的，允許頭下螺紋肩距最大不超過2倍螺距。 若無其他規定，長螺釘的最小螺紋長度為 1.5 in 。 |
同版本產品組
長度公差
Machine screws can be made to any length, but they are generally produced in fractional length increments of 1/16 in. for screws up to 5/8 in. long, 1/8 in. for screws over 5/8 in. through 1-1/2 in. long, and 1/4 in. for screws over 1-1/2 in. long.
標稱螺釘尺寸的長度公差 | |||
標稱螺釘長度 | 螺紋規格 | ||
0000~00 | 0~12 | 1/4~3/4 | |
≤1/2 | -0.01 | -0.02 | -0.03 |
＞1/2,≤1 | -0.02 | -0.03 | -0.03 |
＞1,≤2 | / | -0.06 | -0.06 |
＞2 | / | -0.09 | -0.09 |
類似標準及供貨信息
| 1 |
|
[國標] GB /T 69 - 2016 |
開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(1) |
| 2 |
|
[國標] GB /T 69 - 2000 |
開槽半沉頭螺釘 Countersunk Slotted Raised Head Screws (Common Head Style) 供應商(1) |
| 3 |
|
[國標] GB 69 - 1985 |
開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(1) |
| 4 |
|
[國標] GB 949 - 1988 |
開槽半沉頭不脫出螺釘 Slotted Raised Countersunk Head Screws with Waisted Shank |
| 5 |
|
[美標] IFI 513 - 1982 |
米制開槽半沉頭機械螺釘 Table 4 Metric Slotted Oval Countersunk Head Machine Screws |
| 6 |
|
[德標] DIN 964 - 1990 |
開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws 供應商(3) |
| 7 |
|
[德標] DIN 924 - 2024 |
開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws with Dog Point |
| 8 |
|
[德標] DIN 924 - 2012 |
開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws with Dog Point |
| 9 |
|
[德標] DIN 924 - 2006 |
開槽半沉頭圓柱端螺釘 Slotted Raised Countersunk Head Screws with Dog Point |
| 10 |
|
[國際] ISO 2010 - 2011 |
一字槽半沉頭螺釘(普通頭型).產品等級A Slotted Raised Countersunk Head Screws - Product Grade A 供應商(1) |
| 11 |
|
[國際] ISO 2010 - 1994 |
開槽半沉頭螺釘(通用頭型) 產品等級A級 Countersunk Slotted Raised Head Screws (common head style) - Product Grade A 供應商(1) |
| 12 |
|
[日標] JIS B 1101 (T10) - 2017 |
開槽半沉頭螺釘 表10 Slotted Raised Countersunk Head Screws - Table 10 |
| 13 |
|
[日標] JIS B 1101 (JA5) - 2017 |
開槽半沉頭螺釘 附表JA.5 Slotted Raised Countersunk Head Screws - Table JA.5 |
| 14 |
|
[日標] JIS B 1116 (T5) - 2009 |
精密機械用開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws for Fine Mechanics |
| 15 |
|
[日標] JIS B 1101 (AT4) - 1996 |
開槽半沉頭螺釘 表4 [Attached Table 4] Slotted Raised Countersunk Head Screws [Attached Table 4] |
| 16 |
|
[日標] JIS B 1101 (AAT3) - 1996 |
開槽半沉頭螺釘 附表3 [Annex Attached Table 3] Slotted Raised Countersunk Head Screws [Annex Attached Table 3] |
| 17 |
|
[日標] JIS B 1119 (1CFC) - 1986 |
眼鏡框架用 - 開槽倒角半沉頭螺釘 Spectacle Frames - Slotted Chamfered Flat Countersunk Machine Screws |
| 18 |
|
[日標] JIS B 1119 (1RFC) - 1986 |
眼鏡框架用 - 開槽弧面半沉頭螺釘 Spectacle Frames - Slotted Round Flat Countersunk Machine Screws |
| 19 |
|
[美標] ASME/ANSI B 18.6.3 - 2010 |
開槽半沉頭螺釘Table7 Slottted Oval Countersunk Head Machine Screws |
| 20 |
|
[美標] ASME/ANSI B 18.6.3 (T11) - 2010 |
80°開槽半沉頭清根螺釘Table11 80° Slotted Undercut Oval Countersunk Head Machine Screws |
| 21 |
|
[美標] ASME/ANSI B 18.6.7M - 1998 |
米制開槽半沉頭螺釘Table6 Metric Slotted Raised Countersunk Head Screws |
| 22 |
|
[法國] NF E 25-124 - 1994 |
開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws - Product Grade A |
| 23 |
|
[法國] NF F 03-004 (FB) - 1983 |
鐵路車輛 半沉頭側切口機械螺釘 Railway Rolling Stock Grade A Raised Countersunk Notched Head Machine |
| 24 |
|
[法國] NF F 03-006 (slot) - 1983 |
鐵路車輛 A級開槽半沉頭螺釘/螺母 Railway Rolling Stock Grade A Slotted Raised Countersunk Head Screws/Nuts |
| 25 |
|
[法國] NF F 03-006 (notch) - 1983 |
鐵路車輛 A級 沉頭側切口螺釘/螺母 Railway Rolling Stock Grade A Notched Raised Countersunk Head Screws / Nuts |
| 26 |
|
[英標] BS 1981 - 1991 |
開槽半沉頭螺釘(短的)Table10 Slottted Oval Countersunk Head Screws： Short Length |
| 27 |
|
[英標] BS 1981 - 1991 |
開槽半沉頭螺釘Table8 Slotted Raised Countersunk Head Machine Screws |
| 28 |
|
[英標] BS 4183 (T3) - 1967 |
開槽半沉頭機械螺釘 Slotted Raised Countersunk Head Machine Screws. Metric Series |
| 29 |
|
[英標] BS 450 - 1958 |
英制開槽半沉頭螺釘 - B.S.W. & B.S.F. 螺紋 [Table 3] Slotted 90° Raised-Countersunk Head Screws with B.S.W. & B.S.F. Threads [Table 3] |
| 30 |
|
[澳標] AS /NZS 1427 - 1996 |
米制開槽半沉頭螺釘 [Table 2] ISO Metric Slotted Raised Countersunk Head Screws [Table 2] |
| 31 |
|
[臺灣] CNS 9679 - 1982 |
精密機械用開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws for Fine Mechanics |
| 32 |
|
[臺灣] CNS 4414 - 1981 |
開槽半沉頭螺釘 Slotted Raised Countersunk Head Screws - Product Grade A |
| 33 |
|
[俄標] GOST 17474 - 1980 |
開槽半沉頭螺釘 A級和B級 Raised Countersunk Head Screws (Slotted), Product Grades A and B |
| 34 |
|
[韓標] KS B 1021 (T6) - 2012 (R2022) |
開槽半沉頭螺釘 [Table 6] Slotted Raised Countersunk Head Screws [Table 6] |
| 35 |
|
[德標] DIN EN ISO 2010 - 1994 |
開槽半沉頭螺釘(通用頭型) - 產品等級A級 Slotted Raised Countersunk Head Screws (Common Head Style) - Product Grade A 供應商(3) |
| 36 |
|
[美標] ASME B 18.6.3 (H3C) - 2024 |
82° 開槽半沉頭清根機械螺釘 (ASTM F837/F468) [TABLE 2.2.3-3] 82° Slotted Undercut Oval Countersunk Head Machine Screws (ASTM F837/F468) [TABLE 2.2.3-3] |
| 37 |
|
[美標] ASME B 18.6.3 (T7) - 2013 |
82° 開槽半沉頭機械螺釘 [Table 7] (ASTM F837 / F468) 82° Slotted Oval Countersunk Head Machine Screws [Table 7] (ASTM F837 / F468) |
| 38 |
|
[美標] ASME B 18.6.3 (T11) - 2013 |
82° 開槽半沉頭清根機械螺釘 [table 11] (ASTM F837 / F468) 82° Slotted Undercut Oval Countersunk Head Machine Screws [table 11] (ASTM F837 / F468) |
| 39 |
|
[航天] QJ 2388 - 1992 |
開槽半沉頭螺釘 Slotted Countersunk Raised Head Screws |
| 40 |
|
[航空] HB 1- 209 - 1995 |
90°開槽半沉頭螺釘 90° Countersunk Slotted Raised Head Screws |