液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 耳軸支架 GB /T 39949.1 (AT4) - 2021
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,適用于缸徑25 mm~250 mm 的16 MPa (160bar) 液壓缸和缸徑50 mm~200 mm 的25 MPa (250bar) 液壓缸。 ②,CR-在耳軸支架上用于螺栓的孔 FK-安裝面至銷軸軸線的距離 FN-耳軸支架的總高 HB-支架安裝孔直徑 NH-耳軸支架的厚度 TH-安裝螺栓間距 UL-外形尺寸 CO-鍵槽寬度 KC-鍵槽深度 ?FS-安裝孔的距離 |
同版本產品組
采用標準
注：技術數據僅供參考，請以官方原件為準！
類似標準及供貨信息
| 1 |
|
[國標] GB 1160.2 (A) - 1989 |
旋入式圓形油標 A型 Oil Level Indicators - Screwing Round Type - Type A 供應商(1) |
| 2 |
|
[國標] GB /T 39949.1 (AP2) - 2021 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 活塞桿用雙耳環 內螺紋 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Rod Clevis, Female Thread |
| 3 |
|
[國標] GB /T 39949.1 (AF3) - 2021 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 活塞桿用法蘭 圓形 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Rod Flange, Circular |
| 4 |
|
[國標] GB /T 39949.1 (AB4) - 2021 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 雙耳環支架 通孔 對稱型 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Clevis Bracket Straight |
| 5 |
|
[國標] GB /T 39949.1 (AB3) - 2021 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 雙耳環支架 通孔 斜型 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Clevis Bracket, In Angle |
| 6 |
|
[國標] GB /T 39949.1 (AP6) - 2021 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 活塞桿用帶關節軸承的單耳環 內螺紋 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Rod Eye Spherical, Female Thread |
| 7 |
|
[國標] GB /T 39949.1 (AP4) - 2021 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 活塞桿用單耳環 內螺紋 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Rod Eye Plain, Female Thread |
| 8 |
|
[國標] GB /T 2157 - 1991 |
機床夾具零部件—多手柄螺母 The parts and units of jigs and fixtures Multiple handle nut |
| 9 |
|
[國標] GB /T 2160 - 1991 |
機床夾具零件及部件 壓緊螺釘 The Parts and Units of Jigs and Fixtures-holddown Screw |
| 10 |
|
[國標] GB /T 2171 - 1991 |
機床夾具零件及部件 光面壓塊 The Parts and Units of Jigs and Fixtures - Smooth Face Clamp Plate |
| 11 |
|
[國標] GB /T 2196 (A/C) - 1991 |
機床夾具零件及部件 - 鉤形壓板 A型和C型 The Parts and Units of Jigs and Fixtures - Hook Clamp Plate - Type A and C |
| 12 |
|
[國標] GB /T 2196 (B) - 1991 |
機床夾具零件及部件 - 鉤形壓板 B型 The Parts and Units of Jigs and Fixtures - Hook Clamp Plate - Type B |
| 13 |
|
[國標] GB /T 2197 - 1991 |
機床夾具零件及部件 鉤形壓板（組合） The Parts and Units of Jigs and Fixtures Hook Clamp Plate (Combinatlon) |
| 14 |
|
[國標] GB /T 2198 - 1991 |
機床夾具零件及部件 - 立式鉤型壓板（組合） The Parts and Units of Jigs and Fixtures - Vertical Hook Clamp Plate (Combination) |
| 15 |
|
[國標] GB /T 2199 - 1991 |
機床夾具零件及部件 - 端面鉤形壓板（組合） The Parts and Units of Jigs and Fixtures - End Face Hook Plate (Combination) |
| 16 |
|
[國標] GB /T 2200 - 1991 |
機床夾具零件及部件 - 側面鉤形壓板（組合） The Parts and Units of Jigs and Fixtures - Side Face Hook Clamp Plate (Combination) |
| 17 |
|
[國標] GB /T 2201 - 1991 |
機床夾具零件及部件 定位襯套 The Parts and Units of Jigs and Fixtures Locating Bush |
| 18 |
|
[國標] GB /T 2203 - 1991 |
機床夾具零件及部件 固定式定位銷 The Parts and Units of Jigs and Fixtures (Fixed locating pin) |
| 19 |
|
[國標] GB /T 2205 - 1991 |
機床夾具零件及部件 - 定位插銷 The Parts and Units of Jigs and Fixtures - Aligning Pin |
| 20 |
|
[國標] GB 2206 - 1991 |
機床夾具零件及部件 - 定位鍵 The Parts and Units of Jigs Fixtures - Locating Key |
| 21 |
|
[國標] GB /T 2220 - 1991 |
機床夾具零件及部件 - 活動手柄 The Parts and Units of Jigs and Fixtures - Flexible Handle |
| 22 |
|
[國標] GB /T 2225 - 1991 |
機床夾具零件及部件 - 起重螺栓 The Parts and Units of Jigs and Fixtures - Lifting Bolt |
| 23 |
|
[國標] GB /T 2230 - 1991 |
機床夾具零件及部件 - 調節支承 The Parts and Units of Jigs and Fixtures Adjustable Supporters |
| 24 |
|
[國標] GB /T 2234 - 1991 |
機床夾具零件及部件 - 低支腳 The Parts and Units of Jigs and Fixtures - Short Legs |
| 25 |
|
[國標] GB /T 2256 - 1991 |
機床夾具零件及部件 塑料夾具用六角螺釘 The Parts and Units of Jigs and Fixtures - Hex Screw For Plastic Fixture |
| 26 |
|
[國標] GB /T 2257 - 1991 |
機床夾具零件及部件 塑料夾具用內六角螺釘 The Parts and Units of Jigs and Fixtures - Inner Hex Screw for Plastic Fixtures |
| 27 |
|
[國標] GB 1160.2 (B) - 1989 |
旋入式圓形油標 B型 Oil Level Indicators - Screwing Round Type - Type B |
| 28 |
|
[國標] GB 3473 - 1983 |
船用帶舌插銷 A型 Marine Toggle Pins - Type A |
| 29 |
|
[國標] GB 3473 - 1983 |
船用帶舌插銷 B型 Marine Toggle Pins - Type B |
| 30 |
|
[德標] DIN 71752 - 1994 |
叉型頭, U型頭 Fork Heads 供應商(1) |
| 31 |
|
[德標] DIN 6314 - 2009 |
普通夾具 直邊卡箍 夾緊塊 Clamp, Straight |
| 32 |
|
[德標] DIN 6315 (B) - 2009 |
叉形壓板 夾鉗 B型 Clamp, Forked - Form B |
| 33 |
|
[德標] DIN 6315 (C) - 2009 |
叉形壓板 夾鉗 C型 Clamp, Forked - Form C |
| 34 |
|
[德標] DIN 6306 (-2) - 2002 |
帶移動卡式螺栓的定位銷釘 旋桿 Tommy Screws with Moveable Clamping Bolt - Bar |
| 35 |
|
[德標] DIN 6306 (-3) - 2002 |
帶移動卡式螺栓的定位銷釘 桿端帽 Tommy Screws with Moveable Clamping Bolt - End Caps |
| 36 |
|
[德標] DIN 6320 - 2002 |
工裝和夾具用螺紋體支腳 Feet with Threaded Shank for Jigs and Fixtures |
| 37 |
|
[德標] DIN 6321 - 2002 |
支撐和定位銷 Support and Location Pins |
| 38 |
|
[德標] DIN 172 - 1992 |
導向襯套 鉆套 A型和B型 Press Fit Jig Bushes, Headed - Form A and B |
| 39 |
|
[德標] DIN 1163 - 1973 |
鑄型用銷釘 Molding Pins |
| 40 |
|
[國際] ISO 8132 (AP2) - 2022 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 活塞桿用雙耳環 內螺紋 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Rod Clevis, Female Thread |
| 41 |
|
[國際] ISO 8132 (AF3) - 2022 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 活塞桿用法蘭 圓形 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) Series - Rod Flange, Circular |
| 42 |
|
[國際] ISO 8132 (AB4) - 2022 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 雙耳環支架 通孔 對稱型 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Clevis Bracket Straight |
| 43 |
|
[國際] ISO 8132 (AB3) - 2022 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 雙耳環支架 通孔 斜型 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Clevis Bracket, In Angle |
| 44 |
|
[國際] ISO 8132 (AT4) - 2022 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 耳軸支架 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Trunnion Bracket |
| 45 |
|
[國際] ISO 8132 (AP6) - 2022 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 活塞桿用帶關節軸承的單耳環 內螺紋 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Rod Eye Spherical, Female Thread |
| 46 |
|
[國際] ISO 8132 (AP4) - 2022 |
液壓傳動 16MPa(160bar)中型和25MPa(250 bar)單桿缸附件 - 活塞桿用單耳環 內螺紋 Hydraulic Fluid Power - Accessories for Single Rod Cylinders, 16 Mpa (160 bar) Medium and 25 Mpa (250 bar) Series - Rod Eye Plain, Female Thread |
| 47 |
|
[汽標代號] Q 740 |
螺紋叉 Threaded Connecting Fork |
| 48 |
|
[汽標代號] Q 741 |
螺紋叉 - 細牙 Threaded Connecting Fork - Fine Thread |
| 49 |
|
[汽標代號] Q 742 |
焊接叉 Weldable Connecting Fork |
| 50 |
|
[機械行業] JB /T 7941.2 (A) - 1995 |
旋入式圓形油標 A型 Oil Level Indicators Screwing Round Type - Type A 供應商(1) |
| 51 |
|
[機械行業] JB /T 7934 - 1999 |
Z1型脹緊聯結套 Locking Assemblies, Type Z1 |
| 52 |
|
[機械行業] JB /T 7934 - 1999 |
Z2型脹緊聯結套 Locking Assemblies, Type Z2 |
| 53 |
|
[機械行業] JB /T 7934 - 1999 |
Z3型脹緊聯結套 Locking Assemblies, Type Z3 |
| 54 |
|
[機械行業] JB /T 7934 - 1999 |
Z4型脹緊聯結套 Locking Assemblies, Type Z4 |
| 55 |
|
[機械行業] JB /T 7934 - 1999 |
Z5型脹緊聯結套 Locking Assemblies, Type Z5 |
| 56 |
|
[機械行業] JB /T 7934 - 1999 |
Z6型脹緊聯結套 Locking Assemblies, Type Z6 |
| 57 |
|
[機械行業] JB /T 7934 - 1999 |
Z7A型脹緊聯結套 Locking Assemblies, Type Z7A |
| 58 |
|
[機械行業] JB /T 7934 - 1999 |
Z7B型脹緊聯結套 Locking Assemblies, Type Z7B |
| 59 |
|
[機械行業] JB /T 7934 - 1999 |
Z7C型脹緊聯結套 Locking Assemblies, Type Z7C |
| 60 |
|
[機械行業] JB /T 7934 - 1999 |
Z8型脹緊聯結套 Locking Assemblies, Type Z8 |
| 61 |
|
[機械行業] JB /T 7934 - 1999 |
Z9型脹緊聯結套 Locking Assemblies, Type Z9 |
| 62 |
|
[機械行業] JB /T 7934 - 1999 |
Z10型脹緊聯結套 Locking Assemblies, Type Z10 |
| 63 |
|
[機械行業] JB /T 7934 - 1999 |
Z11型脹緊聯結套 Locking Assemblies, Type Z11 |
| 64 |
|
[機械行業] JB /T 7934 - 1999 |
Z12A型脹緊聯結套 Locking Assemblies, Type Z12A |
| 65 |
|
[機械行業] JB /T 7934 - 1999 |
Z12B型脹緊聯結套 Locking Assemblies, Type Z12B |
| 66 |
|
[機械行業] JB /T 7934 - 1999 |
Z12C型脹緊聯結套 Locking Assemblies, Type Z12C |
| 67 |
|
[機械行業] JB /T 7934 - 1999 |
Z13型脹緊聯結套 Locking Assemblies, Type Z13 |
| 68 |
|
[機械行業] JB /T 7934 - 1999 |
Z15型脹緊聯結套 Locking Assemblies, Type Z15 |
| 69 |
|
[機械行業] JB /T 7934 - 1999 |
Z16型脹緊聯結套 Locking Assemblies, Type Z16 |
| 70 |
|
[機械行業] JB /T 7934 - 1999 |
Z17A型脹緊聯結套 Locking Assemblies, Type Z17A |
| 71 |
|
[機械行業] JB /T 7934 - 1999 |
Z17B型脹緊聯結套 Locking Assemblies, Type Z17B |
| 72 |
|
[機械行業] JB /T 7934 - 1999 |
Z18型脹緊聯結套 Locking Assemblies, Type Z18 |
| 73 |
|
[機械行業] JB /T 7934 - 1999 |
Z19A型脹緊聯結套 Locking Assemblies, Type Z19A |
| 74 |
|
[機械行業] JB /T 7934 - 1999 |
Z19B型脹緊聯結套 Locking Assemblies, Type Z19B |
| 75 |
|
[機械行業] JB /T 7934 - 1999 |
Z20型脹緊聯結套 Locking Assemblies, Type Z20 |
| 76 |
|
[機械行業] JB /T 8004.8 (GB 2155) - 1999 |
機床夾具零件及部件 - 手柄螺母 The Parts and Units of Jigs and Fixtures Handle Nut |
| 77 |
|
[機械行業] JB /T 8004.9 - 1999 |
機床夾具零件及部件 回轉手柄螺母 The Parts and Units of Jigs and Fixtures Rotary Handle Nut |
| 78 |
|
[機械行業] JB /T 8006.1 - 1999 |
機床夾具零件及部件 - 壓緊螺釘 The Parts and Units of Jigs and Fixtures - Holddown Screws |
| 79 |
|
[機械行業] JB /T 8007.3 - 1999 |
鉤形螺栓 Hook Bolt |
| 80 |
|
[機械行業] JB /T 8012.3 - 1999 |
機床夾具零件及部件 - 立式鉤型壓板（組合） The Parts and Units of Jigs and Fixtures - Vertical Hook Clamp Plate (Combination) |
| 81 |
|
[機械行業] JB /T 8012.4 - 1999 |
機床夾具零件及部件 - 端面鉤形壓板（組合） The Parts and Units of Jigs and Fixtures - End Face Hook Clamp Plate (Combination) |
| 82 |
|
[機械行業] JB /T 8012.5 - 1999 |
機床夾具零件及部件 - 側面鉤形壓板（組合） The Parts and Units of Jigs and Fixtures - Sided Face Hook Clamp Plate (Combination) |
| 83 |
|
[機械行業] JB /T 8015 - 1999 |
機床夾具零件及部件 - 定位插銷 The Parts and Units of Jigs and Fixtures - Aligning Pin |
| 84 |
|
[機械行業] JB /T 8026.1 - 1999 |
六角頭支承 Hex Head Supporting |
| 85 |
|
[機械行業] JB /T 8026.4 - 1999 |
機床夾具零件及部件 - 調節支承 The Parts and Units of Jigs and Fixtures Adjustable Supporters |
| 86 |
|
[機械行業] JB /T 8026.7 - 1999 |
機床夾具零件及部件 - 自動調節支承 The Parts and Units of Jigs and Fixtures - Automatic Adjuctable Supportors |
| 87 |
|
[機械行業] JB /T 7941.2 (B) - 1995 |
旋入式圓形油標 B型 Oil Level Indicators Screwing Round Type - Type B |
| 88 |
|
[機械行業] JB 8004.10 - 1995 |
機床夾具零部件—多手柄螺母 The parts and units of jigs and fixtures Multiple handle nut |
| 89 |
|
[標準] YJT 13009 |
腳杯 Leveling Mounts 供應商(1) |
| 90 |
|
[標準] YJT 13003 |
叉形接頭 Fork Joints |
| 91 |
|
[標準] YJT 13011 |
萬向調節腳 Swivel Leveling Mounts |
| 92 |
|
[汽標] QC /T 336 - 1999 |
螺紋叉 Threaded Connecting Fork |
| 93 |
|
[汽標] QC /T 337 - 1999 |
焊接叉 Weldable Connecting Fork |
| 94 |
|
[美國軍標] MS 35489 - 2012 |
護線圈 Grommets, Synthetic and Silicone Rubber, Hot-oil and Coolant Resistant |
| 95 |
|
[美標] ANSI /ABMA 8.2 - 1999 |
英制滾珠軸承和滾柱軸承配件 鎖板 Table 5.3 Lockplate Dimensions Inch Design Series P-000 |
| 96 |
|
[航空] HB 8069 - 2002 |
帶螺母的角材 Angle with Nuts |
| 97 |
|
[航空] HB 863 - 1990 |
螺紋頂桿 |
| 98 |
|
[航空] HB 2026 - 1989 |
表夾 |
| 99 |
|
[航空] HB 2059 (-2) - 1989 |
切向夾緊件 - 襯套 |
| 100 |
|
[航空] HB 2059 - 1989 |
切向夾緊件 |
© 易緊通 服務熱線：4006-164580（免長途費）