開槽凹端緊定螺釘 (A307, SAE J429, F468, F593) ASME B 18.6.2 (T3-Cup) - 2020
| 選擇規格尺寸 點擊↓ 0# 0.0600 1# 0.0730 2# 0.0860 3# 0.0990 4# 0.1120 5# 0.1250 6# 0.1380 8# 0.1640 10# 0.1900 12# 0.2160 1/4 0.2500 5/16 0.3125 3/8 0.3750 7/16 0.4375 1/2 0.5000 9/16 0.5625 5/8 0.6250 3/4 0.7500 |
尺寸單位:
inch |
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ①,公稱長度大于等于Y值的螺釘，角度α為45°（0°~+5°），對于公稱長度更短的螺釘，其角度α為30°。 ②,公稱尺寸小于等于5#（0.125英寸）的半徑公差為-0.00英寸~+0.015英寸，較大尺寸的半徑公差為-0.00英寸~+0.031英寸。制造商可選擇將螺釘的開槽端做成平的。 ③,當以小數表示公稱尺寸時，應省略小數點前和小數點后第四位的零。 ④,凹端內允許有輕微的平面或倒圓。 |
同版本產品組
類似標準及供貨信息
| 1 |
|
[國標] GB /T 74 - 2018 |
開槽凹端緊定螺釘 Slotted Set Screws with Cup Point 供應商(2) |
| 2 |
|
[國標] GB 74 - 1985 |
開槽凹端緊定螺釘 Slotted Set Screws with Cup Point 供應商(2) |
| 3 |
|
[德標] DIN 438 - 1986 |
開槽凹端緊定螺釘 Slotted Set Screws with Cup Piont |
| 4 |
|
[國際] ISO 7436 - 2024 |
開槽凹端緊定螺釘 Slotted Set Screws with Cup Point |
| 5 |
|
[國際] ISO 7436 - 1983 |
開槽凹端緊定螺釘 Slotted Set Screws with Cup Point |
| 6 |
|
[日標] JIS B 1117 (T5) - 2010 |
開槽凹端緊定螺釘 Slotted Set Screws with Cup Point |
| 7 |
|
[日標] JIS B 1117 (T4) - 1995 |
開槽凹端緊定螺釘 Slotted Screws with Cup Point |
| 8 |
![開槽凹端緊定螺釘 [Table 5] (A307, SAE J429, F468, F593)](http://img.164580.com/upload/48/pic/2025/01/02/1735801945702317089.jpg)
|
[美標] ASME/ANSI B 18.6.2 (T5 cup) - 1998 (R2010) |
開槽凹端緊定螺釘 [Table 5] (A307, SAE J429, F468, F593) Slotted Set Screws with Cup Point [Table 5] (A307, SAE J429, F468, F593) |
| 9 |
|
[歐標] EN 27436 - 1992 |
開槽凹端緊定螺釘 Slotted Set Screws with Cup Point |
| 10 |
|
[法國] NF E 25-163 - 1992 (R2002) |
開槽凹端緊定螺釘 Slotted Set Screws with Cup Point |
| 11 |
|
[臺灣] CNS 4476 - 1981 |
開槽凹端緊定螺釘 Slotted Set Screws with Cup Point |
| 12 |
|
[俄標] GOST 1479 - 1993 |
開槽凹端緊定螺釘 A級及B級 Cup-point Straight Slotted Set Screws. Product Grades А and В |
| 13 |
|
[德標] DIN EN 27436 - 1992 |
開槽凹端緊定螺釘 Slotted Set Screws with Cup Point |