會員中心 | English | 繁體中文

開槽半沉頭自攻螺釘 GOST 1483 - 2013

選擇規格尺寸點擊↓

ST2.2

ST2.9

ST3.5

ST4.2

ST4.8

ST5.5

ST6.3

ST8

ST9.5

尺寸單位: mm

俄標GOST 1483 - 2013 GOST1483 1483GOST 開槽半沉頭自攻螺釘

掃一掃分享

單重計算公差

螺紋規格

ST2.2

ST2.9

ST3.5

ST4.2

ST4.8

ST5.5

ST6.3

ST8

ST9.5

P	螺距
a	最大值
d_k	理論	最大值
	實際	最大值
		最小值
f	≈
k	最大值
n	最大值
	最小值
r	最大值
R₁	≈
t	最大值
	最小值
y	參考值	C型
		F型
		R型

0.8	1.1	1.3	1.4	1.6	1.8	1.8	2.1	2.1
0.8	1.1	1.3	1.4	1.6	1.8	1.8	2.1	2.1
4.4	6.3	8.2	9.4	10.4	11.5	12.6	17.3	20
3.8	5.5	7.3	8.4	9.3	10.3	11.3	15.8	18.3
3.5	5.2	6.9	8	8.9	9.9	10.9	15.4	17.8
0.5	0.7	0.8	1.0	1.2	1.3	1.4	2.0	2.3
1.1	1.7	2.35	2.6	2.8	3	3.15	4.65	5.25
0.7	1	1.2	1.51	1.51	1.91	1.91	2.31	2.81
0.56	0.86	1.06	1.26	1.26	1.66	1.66	2.06	2.56
0.8	1.2	1.4	1.6	2.0	2.2	2.4	3.2	4.0
4.0	6.0	8.5	9.5	9.5	11.0	12.0	16.5	19.5
1	1.45	1.7	1.9	2.4	2.6	2.8	3.7	4.4
0.8	1.2	1.4	1.6	2	2.2	2.4	3.2	3.8
2.0	2.6	3.2	3.7	4.3	5.0	6.0	7.5	8.0
1.6	2.1	2.5	2.8	3.2	3.6	3.6	4.2	4.2
/	/	2.7	3.2	3.6	4.3	5.0	6.3	/

采用標準

ISO 1483 - 2011

開槽半沉頭自攻螺釘

技術條件和引用標準

材料
通用要求
螺紋	公差
機械性能	等級
	標準
公差	產品等級
	標準
表面處理
驗收及包裝

鋼（ISO 2702）	不銹鋼
ISO 8992
ISO 1478
/	A2-20H，A4-20H，A5-20H
ISO 2702	ISO 3506-4
A
ISO 4759-1
不經處理電鍍 ISO 4042 非電解鋅片涂層 ISO 10683 其他表面處理由供需雙方協議	不經處理鈍化 ISO 16048
ISO 3269

引用參考

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 193 - 2003

普通螺紋（一般用途米制螺紋）- 直徑與螺距系列 (ISO 261: 1998, MOD)

GB /T 5280 - 2002

自攻螺釘用螺紋

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息

1	[國標] GB /T 5284 - 2017	開槽半沉頭自攻螺釘 Slotted Raised Countersunk (Oval) Head Tapping Screws
2	[國標] GB /T 5284 - 1985	開槽半沉頭自攻螺釘 Slotted Raised Countersunk Head Tapping Screws
3	[美標] IFI 502 - 1982	米制開槽半沉頭自攻釘 Metric Slotted Oval Countersunk Head Tapping Screws
4	[德標] DIN 7973 - 1990	開槽半沉頭自攻螺釘 Slotted Raised Countersunk Head Tapping Screws 供應商(3)
5	[國際] ISO 1483 - 2011	開槽半沉頭自攻螺釘 Slotted Raised Countersunk (Oval) Head Tapping Screws
6	[國際] ISO 9268 (F1) - 1988	開槽接骨螺釘 HC螺紋 [Figure 1] Metal Bone Screw with Single-slot Recess, with Symmetrical Thread Form HC [Figure 1]
7	[國際] ISO 1483 - 1983	開槽半沉頭自攻螺釘 Slotted Raised Countersunk Head Tapping Screws
8	[日標] JIS B 1115 (T9) - 2015	開槽半沉頭自攻螺釘 [Table 9] Slotted Raised Countersunk Head Tapping Screws [Table 9]
9	[日標] JIS B 1115 (JA5) - 2015	開槽半沉頭自攻釘 [表JA5] Slotted Raised Countersunk Head Tapping Screws [Table JA5]
10	[日標] JIS B 1115 (T3) - 1996	開槽半沉頭自攻釘 [表3] Slotted Raised Countersunk Head Tapping Screws [Table 3]
11	[日標] JIS B 1115 (AT3) - 1996	開槽半沉頭自攻釘 [附表3] Slotted Raised Countersunk Head Tapping Screws [Annex Table 3]
12	[美標] ASME/ANSI B 18.6.3 - 2010	80°開槽半沉頭自攻釘 80° Machine Screw and Tapping Screw Nuts (Inch Seires)
13	[法國] NF E 25-661 - 1994	開槽半沉頭自攻螺釘 Slotted Raised Countersunk (Oval) Head Tapping Screws
14	[英標] BS 4174 - 1972	開槽80°半沉頭自攻釘 [Table 12] 80°Slotted Raised Countersunk Head Tapping Screws [Table 12]
15	[英標] BS 4174 - 1972	米字槽80°半沉頭自攻釘 [Table 13] Cross Recess 80° Raised Countersunk Head Tapping Screws [Table 13]
16	[英標] BS 4174 - 1972	開槽80°半沉頭清根自攻釘 [Table 14] Slotted 80° Truncated Raised Countersunk Head Screws [Table 14]
17	[澳標] AS /NZS 4405 - 1996	米制開槽半沉頭自攻螺釘 ISO Metric Slotted Raised Countersunk Head Tapping Screws
18	[德標] DIN EN ISO 1483 - 2011	開槽半沉頭自攻螺釘 Slotted Raised Countersunk (Oval) Head Tapping Screws 供應商(3)
19	[美標] ASME B 18.6.3 (H2A+T1A) - 2024	82°開槽半沉頭 AB ABR 自攻螺釘 82° Dimensions of Slotted Oval Countersunk Head Tapping Screws
20	[美標] ASME B 18.6.3 (H3C+T1A) - 2024	80° 開槽半沉頭清根 AB、ABR型自攻螺釘 80° Slotted Undercut Oval Countersunk Head Tapping Screws - Type AB、ABR
21	[美標] ASME B 18.6.3 (T7+T40) - 2013	82°開槽半沉頭 AB ABR 自攻螺釘 [Table 7] 82° Slotted Oval Countersunk Head Tapping Screws [Table 7]
22	[美標] ASME B 18.6.3 (T11t) - 2013	80° 開槽半沉頭清根自攻螺釘 [Table 11] 80° Slotted Undercut Oval Countersunk Head Tapping Screws [Table 11]
23	[美標] ASME B 18.6.5M (T12) - 2000 (R2010)	米制開槽半沉頭自攻釘 [Table 12] Metrice Slotted Raised Countersunk Head Tapping Screws [Table 12]
24	[美標] ASME B 18.6.4 - 1998 (R2005)	開槽半沉頭自攻螺釘 B,BP型 [Table 20] slotted Oval Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 20]
25	[美標] ASME B 18.6.4 - 1998 (R2005)	開槽半沉頭自攻螺釘 C型(統一螺紋) [Table 20] slotted Oval Countersunk Head Tapping Screws - Type C Thread Forming [Table 20]
26	[美標] ASME B 18.6.4 - 1998 (R2005)	開槽半沉頭自攻螺釘 AB型 [Table 20] slotted Oval Countersunk Head Tapping Screws - Type AB Thread Forming [Table 20]
27	[美標] ASME B 18.6.4 - 1998 (R2005)	開槽半沉頭自攻螺釘 A型 [Table 20] slotted Oval Countersunk Head Tapping Screws - Type A Thread Forming [Table 20]
28	[醫藥行業標準] YY 0018 (T6) - 2016	HC型開槽接骨螺釘 [Table 6] Metal bone Screw with Single-slot Recess, with Symmetrical Thread Form HC [Table 6]