半長錐槽的槽銷-倒角端 ISO 8745 (CH) - 2025
| 選擇規格尺寸 點擊↓ (1) 1.5 2 2.5 3 (3.5) 4 5 6 (7) 8 (9) 10 12 (14) 16 (18) 20 25 括號內尺寸為非優選
|
尺寸單位:
mm |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
| ①,末端倒角的型式僅在訂購時根據特定要求進行。 |
同版本產品組
技術條件和引用標準
| 材料 ① |
|
||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
類似標準及供貨信息
| 1 |
|
[國標] GB /T 13829.5 - 2004 |
槽銷 全長錐槽 Groovd Pins-Full-Length Taper Grooved 供應商(2) |
| 2 |
|
[國標] GB /T 13829.6 - 2004 |
槽銷 半長錐槽 Grooved Pins - Half-Length Taper Grooved 供應商(2) |
| 3 |
|
[國標] GB /T 13829.7 - 2004 |
槽銷 半長倒錐槽 Grooved Pins-Half-Length Reverse-Taper Grooved 供應商(1) |
| 4 |
|
[國標] GB /T 13829.2 (A) - 1992 |
A型-錐槽的槽銷 Grooved Pins-taper Grooved, A-style 供應商(2) |
| 5 |
|
[國標] GB /T 13829.2 (B) - 1992 |
B型-半長錐槽的槽銷 Grooved Pins-half-length Taper Grooved 供應商(2) |
| 6 |
|
[國標] GB /T 13829.2 (C) - 1992 |
C型-半長倒錐槽的槽銷 Grooved Pins-half-length Reverse-taper Grooved 供應商(1) |
| 7 |
|
[德標] DIN 1471 - 1978 |
槽銷 全長錐槽 Grooved Pins, Full Length Taper Grooved 供應商(3) |
| 8 |
|
[德標] DIN 1472 - 1978 |
槽銷 半長錐槽 Grooved Pins, Half Length Taper Grooved 供應商(4) |
| 9 |
|
[德標] DIN 1474 - 1978 |
槽銷,半長倒錐槽 Grooved Pins-Half-Length Reverse-Taper Grooved |
| 10 |
|
[國際] ISO 8741 (RN) - 2025 |
半長倒錐槽的槽銷-倒圓端 Reverse-taper Grooved Pins - Half-length Progressive Grooves - Rounded Ends 供應商(1) |
| 11 |
|
[國際] ISO 8744 (RN) - 2025 |
槽銷—全長錐槽 倒圓端 Taper Grooved Pins - Full-length Progressive Grooves - Pin with Rounded Ends (RN) 供應商(2) |
| 12 |
|
[國際] ISO 8745 (RN) - 2025 |
半長錐槽的槽銷 倒圓端 Taper Grooved Pins - Half-length Progressive Grooves - Pin with Rounded Ends (RN) 供應商(2) |
| 13 |
|
[國際] ISO 8741 - 1997 |
半長倒錐槽的槽銷 Grooved Pins - Half-length Reverse Taper Grooved 供應商(1) |
| 14 |
|
[國際] ISO 8744 - 1997 |
槽銷—全長錐槽 Groovd Pins-Full-Length Taper Grooved 供應商(2) |
| 15 |
|
[國際] ISO 8745 - 1997 |
B型-半長錐槽的槽銷 Grooved Pins-Half-Length Taper Grooved 供應商(2) |
| 16 |
|
[國際] ISO 13670 (RN) - 2025 |
倒錐形槽銷 - 兩側1/4長度漸變槽 - 圓端 Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Rounded Ends |
| 17 |
|
[國際] ISO 13670 (CH) - 2025 |
倒錐形槽銷 - 兩側1/4長度漸變槽 - 帶倒角端 Reverse-taper Grooved Pins - One Quarter-length Progressive Grooves on Both Sides, Pin with Chamfered Ends |
| 18 |
|
[國際] ISO 8741 (CH) - 2025 |
半長倒錐槽的槽銷-倒角端 Reverse-taper Grooved Pins - Half-length Progressive Grooves - Chamfered Ends |
| 19 |
|
[國際] ISO 8744 (CH) - 2025 |
槽銷—全長錐槽 倒角端 Taper Grooved Pins - Full-length Progressive Grooves - Pin with Chamfered Ends (CH) |
| 20 |
|
[美標] ASME/ANSI B 18.8.100M (B18.8.9M T7) - 2000 (R2005) |
米制 半長錐槽 槽銷 TYPE 45 [Table 7] Grooved Pins with Half-length Taper Grooved, Metric Series, TYPE 45 [Table 7] |
| 21 |
|
[美標] ASME/ANSI B 18.8.100M (B18.8.9M T6) - 2000 (R2005) |
米制 全長錐槽 槽銷 Type 44 [Table 6] Metric Series, Grooved Pins with Full-length Taper Grooved, Type 44 [Table 6] |
| 22 |
|
[美標] ASME/ANSI B 18.8.100M (B18.8.9M A) - 2000 (R2005) |
米制 半長倒錐溝槽 槽銷 TYPE 41 Metric Grooved Pins - Half-length Reverse-taper Grooved, TYPE 41 |
| 23 |
|
[歐標] EN 28741 - 1992 |
槽銷，半長倒錐槽 Grooved Pins - Half-length Reverse-taper Grooved |
| 24 |
|
[法國] NF E 25-762 - 1997 |
圓錐銷 半長溝槽 Grooved Pins. Half-Length Reverse-Taper Grooved |
| 25 |
|
[法國] NF E 25-764 - 1997 (R2002) |
槽銷 全長錐槽 Grooved Pins-Full-Length Taper Grooved |
| 26 |
|
[法國] NF E 25-765 - 1997 |
槽銷 半長錐槽 Grooved Pins - Half-Length Taper Grooved |
| 27 |
|
[美標] SAE J 494 (A) - 2004 |
A型 槽銷 Grooved Straight Pins - Type A |
| 28 |
|
[美標] SAE J 494 (B) - 2004 |
B型 槽銷 Grooved Straight Pins - Type B |
| 29 |
|
[美標] SAE J 494 (D) - 2004 |
D型 槽銷 Grooved Straight Pins - Type D |
| 30 |
|
[德標] DIN EN ISO 8744 - 1998 |
槽銷—全長錐槽 Groovd Pins - Full-Length Taper Grooved 供應商(3) |
| 31 |
|
[德標] DIN EN ISO 8745 - 1998 |
槽銷 半長錐槽 Grooved Pins, Half-Length Taper Grooved 供應商(4) |
| 32 |
|
[德標] DIN EN ISO 8741 - 1998 |
槽銷，半長倒錐槽 Grooved Pins - Half-length Reverse-Taper Grooved |
| 33 |
|
[歐標] EN ISO 8741 - 1997 |
半長倒錐槽的槽銷 Grooved Pins - Half-length Reverse-taper Grooved |
| 34 |
|
[印標] IS 7386 - 2005 |
半長倒錐槽的槽銷 Grooved Pins - Half-length Reverse Taper Grooved |
| 35 |
|
[美標] ASME B 18.8.2 - 2020 |
A型槽銷 全長錐槽 [Table 8 -2] Grooved Pins - Type A |
| 36 |
|
[美標] ASME B 18.8.2 - 2000 (R2010) |
A型槽銷 全長錐槽 [Table 6] Grooved Pins - Type A |